Design of Cold Mass Supports for a Superconducting Undulator Prototype at SINAP
文献类型：期刊论文
| 作者 | Liu, YY; Wang, J; Wang, L; Sun, S; Wang, SH; Yin, LX |
| 刊名 | IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
 |
| 出版日期 | 2015 |
| 卷号 | 25期号:3页码:— |
| 关键词 | HELIUM COOLING SYSTEM |
| 英文摘要 | A superconducting undulator (SCU) prototype with a period of 16 mm and a magnetic gap of 8 mm has been under design and fabrication at the Shanghai Institute of Applied Physics in China since late 2013. The SCU prototype is aimed at obtaining the magnetic field of 0.88 T at the beam axis. A set of support systems was designed to support the cold masses, including superconducting coils, a beam chamber, and thermal shields. A set of self-centering cold mass supports are adopted for the superconducting magnet for the purpose of self-alignment at low temperature. The beam chamber is supported by G-10 spacers against the magnet. The nonmetallic tension rods and spacers are used to support the 60- and 20-K thermal shields, respectively. The heat loads conducted to the cold masses through the supports need to be minimized. This paper presents the design details of the support system. |
| 收录类别 | SCI |
| 语种 | 英语 |
| 公开日期 | 2015-12-24 |
| 源URL | [http://ir.sinap.ac.cn/handle/331007/24425]  |
| 专题 | 上海应用物理研究所_中科院上海应用物理研究所2011-2017年 |
| 推荐引用方式 GB/T 7714 | Liu, YY,Wang, J,Wang, L,et al. Design of Cold Mass Supports for a Superconducting Undulator Prototype at SINAP[J]. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY,2015,25(3):—. |
| APA | Liu, YY,Wang, J,Wang, L,Sun, S,Wang, SH,&Yin, LX.(2015).Design of Cold Mass Supports for a Superconducting Undulator Prototype at SINAP.IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY,25(3),—. |
| MLA | Liu, YY,et al."Design of Cold Mass Supports for a Superconducting Undulator Prototype at SINAP".IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY 25.3(2015):—. |
入库方式： OAI收割
来源：上海应用物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。