Surface modification of aramid fiber by plasma induced vapor phase graft polymerization of acrylic acid. I. Influence of plasma conditions
文献类型：期刊论文
| 作者 | Wang, CX; Du, M; Lv, JC; Zhou, QQ; Ren, Y; Liu, GL; Gao, DW; Jin, LM |
| 刊名 | APPLIED SURFACE SCIENCE
 |
| 出版日期 | 2015 |
| 卷号 | 349页码:333—342 |
| 关键词 | ATMOSPHERIC-PRESSURE PLASMA PET FILMS INTERFACIAL PROPERTIES CHEMICAL TREATMENT PENETRATION DEPTH RAMIE FIBERS PBO FIBER COMPOSITES ADHESION FABRICS |
| ISSN号 | 0169-4332 |
| 通讯作者 | Wang, CX (reprint author), Yancheng Inst Technol, Coll Text & Clothing, Yancheng 224003, Jiangsu, Peoples R China. |
| 英文摘要 | Plasma induced vapor phase graft polymerization (PIVPGP) method was applied to modify aramid fiber surface. In this study, aramid fibers were pretreated under various plasma conditions such as different treatment times, output powers and working gases to see how these plasma processing parameters influenced the PIVPGP of acrylic acid (AA) on aramid fiber surface and its surface structure and properties. The analysis results of atomic force microscope (AFM) and X-ray photoelectron spectroscope (XPS) showed the increase of surface roughness and the introduction of O=C OH, which confirmed that the PIVPGP of AA on aramid fiber surface was achieved. The contact angle and interfacial shear strength (IFSS) of the aramid fibers modified by PIVPGP of AA prominently decreased and increased, respectively, indicating the obvious improvements of surface wettability and adhesion between aramid fiber and matrix. The surface modification effects of aramid fiber by PIVPGP of AA firstly increased and then after 15 min slightly decreased with the increasing plasma treatment time, and but firstly increased and then after 300W nearly remained unchanged with the increasing output power, respectively. Among different working gases, Ar plasma occupied first place, O-2 plasma and N-2 plasma came second and third in the aspect of PIVPGP of AA on aramid fiber surface, respectively. It could be concluded that the PIVPGP of AA on aramid fiber surface could effectively improve surface wettability and adhesion. Plasma conditions had signally influence on the efficiency of PIVPGP of AA on aramid fiber surface and its surface structure and properties with the primary sequence of plasma treatment time, output power and working gas. Therefore adequate plasma processing parameters should be carefully selected for the optimum surface modification of aramid fiber by PIVPGP of AA. (C) 2015 Elsevier B.V. All rights reserved. |
| 语种 | 英语 |
| WOS记录号 | WOS:000357129100047 |
| 公开日期 | 2016-03-08 |
| 源URL | [http://ir.sinap.ac.cn/handle/331007/25060]  |
| 专题 | 上海应用物理研究所_中科院上海应用物理研究所2011-2017年 |
| 推荐引用方式 GB/T 7714 | Wang, CX,Du, M,Lv, JC,et al. Surface modification of aramid fiber by plasma induced vapor phase graft polymerization of acrylic acid. I. Influence of plasma conditions[J]. APPLIED SURFACE SCIENCE,2015,349:333—342. |
| APA | Wang, CX.,Du, M.,Lv, JC.,Zhou, QQ.,Ren, Y.,...&Jin, LM.(2015).Surface modification of aramid fiber by plasma induced vapor phase graft polymerization of acrylic acid. I. Influence of plasma conditions.APPLIED SURFACE SCIENCE,349,333—342. |
| MLA | Wang, CX,et al."Surface modification of aramid fiber by plasma induced vapor phase graft polymerization of acrylic acid. I. Influence of plasma conditions".APPLIED SURFACE SCIENCE 349(2015):333—342. |
入库方式： OAI收割
来源：上海应用物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。