Physics design of a 10 MeV injector test stand for an accelerator-driven subcritical system
文献类型：期刊论文
| 作者 | Yan F(闫芳) ; Pei SL(裴士伦); Geng HP(耿会平); Meng C(孟才); Zhao YL(赵亚亮); Sun B(孙彪); Cheng P(程鹏); Yang Z(杨征); 欧阳华甫; Tang JY(唐靖宇)
|
| 刊名 | PHYSICAL REVIEW SPECIAL TOPICS-ACCELERATORS AND BEAMS
 |
| 出版日期 | 2015 |
| 卷号 | 18页码:54201 |
| 通讯作者 | 闫芳 |
| 英文摘要 | The 10 MeV accelerator-driven subcritical system (ADS) Injector I test stand at Institute of High Energy Physics (IHEP) is a testing facility dedicated to demonstrate one of the two injector design schemes [Injector Scheme-I, which works at 325 MHz], for the ADS project in China. The injector is composed of two parts, the linac part and the beam dump line. The former is designed on the basis of 325 MHz four-vane type copper structure radio frequency quadrupole and superconducting (SC) spoke cavities with beta = 0.12. The latter is designed to transport the beamcoming out of the SC section of the linac to the beam dump, where the beam transverse profile is fairly enlarged and unformed to simplify the beam target design. The SC section consists of two cryomodules with 14 beta = 0.12 Spoke cavities, 14 solenoid and 14 BPMs in total. The first challenge in the physics design comes from the necessary space required for the cryomodule separation where the periodical lattice is destroyed at a relatively lower energy of similar to 5 MeV. Another challenge is the beam dump line design, as it will be the first beam dump line being built by using a step field magnet for the transverse beam expansion and uniformity in the world. This paper gives an overview of the physics design study together with the design principles and machine construction considerations. The results of an optimized design, fabrication status and end to end simulations including machine errors are presented. |
| 学科主题 | Physics |
| 类目[WOS] | Physics, Nuclear ; Physics, Particles & Fields |
| 收录类别 | SCI |
| WOS记录号 | WOS:000354967800001 |
| 公开日期 | 2016-05-03 |
| 源URL | [http://ir.ihep.ac.cn/handle/311005/228505]  |
| 专题 | 高能物理研究所_加速器中心 |
| 推荐引用方式 GB/T 7714 | Yan F,Pei SL,Geng HP,et al. Physics design of a 10 MeV injector test stand for an accelerator-driven subcritical system[J]. PHYSICAL REVIEW SPECIAL TOPICS-ACCELERATORS AND BEAMS,2015,18:54201. |
| APA | 闫芳.,裴士伦.,耿会平.,孟才.,赵亚亮.,...&Ge, R.(2015).Physics design of a 10 MeV injector test stand for an accelerator-driven subcritical system.PHYSICAL REVIEW SPECIAL TOPICS-ACCELERATORS AND BEAMS,18,54201. |
| MLA | 闫芳,et al."Physics design of a 10 MeV injector test stand for an accelerator-driven subcritical system".PHYSICAL REVIEW SPECIAL TOPICS-ACCELERATORS AND BEAMS 18(2015):54201. |
入库方式： OAI收割
来源：高能物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。