Design and cooling of BESIII beryllium beam pipe
文献类型：期刊论文
| 作者 | Li XF(李勋锋); Ji Q(纪全) ; Zheng LF(郑莉芳); Li, XF; Ji, Q; Wang, L; Zheng, LF
|
| 刊名 | NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT
 |
| 出版日期 | 2008 |
| 卷号 | 585期号:1-2页码:#REF! |
| 关键词 | BESIII beryllium beam pipe cooling system automation |
| 通讯作者 | Wang, L (reprint author), Univ Sci & Technol Beijing, Beijing 100083, Peoples R China. |
| 英文摘要 | The beryllium beam pipe was restructured according to the requirements of the upgraded BESIII (Beijing Spectrometer) experiment. SMO-1 (sparking machining oil no. 1) was selected as the coolant for the central beryllium beam pipe. The cooling gap width of the beryllium beam pipe was calculated, the influence of concentrated heat load on the wall temperature of the beryllium beam pipe was studied, and the optimal velocity of the SMO-1 in the gap was determined at the maximum heat load. A cooling system for the beam pipe was developed to control the outer wall temperature of the beam pipe. The cooling system is reported in this paper with regard to the following two aspects: the layouts and the automation. The performance of the cooling system was tested on the beam pipe model with trim size. The test results show that the design of the beryllium beam pipe is reasonable and that the cooling system achieves the BESIII experimental aim. The cooling system has already passed the acceptance test and has been installed in position. It will be put into practice for the BESIII experiment in 2008. (c) 2007 Elsevier B.V. All rights reserved. |
| 学科主题 | Instruments & Instrumentation; Nuclear Science & Technology; Physics; Spectroscopy |
| 类目[WOS] | Instruments & Instrumentation ; Nuclear Science & Technology ; Physics, Particles & Fields ; Spectroscopy |
| 收录类别 | SCI |
| WOS记录号 | WOS:000253082000005 |
| 公开日期 | 2016-05-03 |
| 源URL | [http://ir.ihep.ac.cn/handle/311005/225679]  |
| 专题 | 高能物理研究所_实验物理中心 |
| 推荐引用方式 GB/T 7714 | Li XF,Ji Q,Zheng LF,et al. Design and cooling of BESIII beryllium beam pipe[J]. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT,2008,585(1-2):#REF!. |
| APA | 李勋锋.,纪全.,郑莉芳.,Li, XF.,Ji, Q.,...&Zheng, LF.(2008).Design and cooling of BESIII beryllium beam pipe.NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT,585(1-2),#REF!. |
| MLA | 李勋锋,et al."Design and cooling of BESIII beryllium beam pipe".NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT 585.1-2(2008):#REF!. |
入库方式： OAI收割
来源：高能物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。