中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Experimental research on bearing capacity of the stainless steel fastener in neutrino central detector

文献类型:期刊论文

作者Wang; Zongyi; Wang; Yuanqing; Du; Xinxi; Heng; Yuekun; Chen; Zhihua
刊名JOURNAL OF TIANJIN UNIVERSITY SCIENCE AND TECHNOLOGY
出版日期2015
卷号48页码:110-114
关键词ABAQUS software Experimental methods Experimental research Latticed shells Neutrino detectors Stainless steel fasteners Stress levels Ultimate bearing capacity
其他题名中微子探测器中不锈钢紧固件的承载性能试验
英文摘要The scheme of an acrylic ball supported by a double-layer stainless steel latticed shell for Jiangmen Underground Neutrino Observatory(JUNO)central detector employs patched acrylic and stainless steel fastener to connect the main acrylic and braces. In order to achieve the fastener which meets the usage requirement, three identical fastener specimens have been designed and the corresponding axial tensile tests conducted repeatedly. Furthermore, their ultimate bearing capacities, failure modes and stress levels of all parts under design load have been studied by means of experimental method. Subsequently, the finite element analysis has been conducted with ABAQUS software. Results show that the ultimate bearing capacities of these three specimens are 2 400 kN, 2 500 kN and 2 100 kN, respectively, and at least 14 times the safety reserve is possessed. All the failure modes of these specimens are the separation of the ball hat and ball cover. Under the design load of 140 kN, the stress on every part is significantly lower than the yield strength. Thereby, the stainless steel fastener designed in the present research is safe and reliable, and it can meet the requirement of JUNO central detector. ©, 2015, Tianjin University. All right reserved.
类目[WOS]421 Strength of Building Materials ; Mechanical Properties ; 422.2 Strength of Building Materials : Test Methods ; 545.3 Steel ; 601.3 Mechanisms ; 605 Small Tools and Hardware ; 921.6 Numerical Methods ; 931.3 Atomic and Molecular Physics ; 944.7 Radiation Measuring Instruments
收录类别EI
公开日期2016-05-03
源URL[http://ir.ihep.ac.cn/handle/311005/228921]  
专题高能物理研究所_实验物理中心
推荐引用方式
GB/T 7714
Wang,Zongyi,Wang,et al. Experimental research on bearing capacity of the stainless steel fastener in neutrino central detector[J]. JOURNAL OF TIANJIN UNIVERSITY SCIENCE AND TECHNOLOGY,2015,48:110-114.
APA Wang.,Zongyi.,Wang.,Yuanqing.,Du.,...&Qin ZH.(2015).Experimental research on bearing capacity of the stainless steel fastener in neutrino central detector.JOURNAL OF TIANJIN UNIVERSITY SCIENCE AND TECHNOLOGY,48,110-114.
MLA Wang,et al."Experimental research on bearing capacity of the stainless steel fastener in neutrino central detector".JOURNAL OF TIANJIN UNIVERSITY SCIENCE AND TECHNOLOGY 48(2015):110-114.

入库方式: OAI收割

来源:高能物理研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。