Copper-Coated Tungsten Powders with Core-Shell Structure Prepared by Intermittent Electrodeposition
文献类型：期刊论文
| 作者 | Wu Peng1,2,3; Li Jianqiang1,2; Zhou Zhangjian3; Ma Bingqian1,2; Liu Pengjie3; Wang Man3 |
| 刊名 | RARE METAL MATERIALS AND ENGINEERING
 |
| 出版日期 | 2015-11-01 |
| 卷号 | 44期号:S1页码:47-51 |
| 关键词 | intermittent electrodeposition copper-coated tungsten core-shell structure Volmer-Weber mode |
| ISSN号 | 1002-185X |
| 英文摘要 | Due to low coefficient of thermal expansion and high thermal conductivity, tungsten-copper composites can effectively transmit heat generated by the integrated circuit, thus prolonging the life of the circuit. Copper-coated tungsten composite powders help to improve the overall performance of tungsten-copper composites. Copper-coated tungsten powders were prepared by intermittent electrodeposition. The effects of different plating time on composite powder surface morphology, thickness, copper content and copper plating deposition rate were investigated, and simultaneously the formation mechanism of copper plating layer was also studied. The analysis results show that tungsten copper composite powders prepared by intermittent electrodepositon are the core-shell structure of copper-coated tungsten, the copper coating is uniform, dense, and the surface roughness is small; in the conditions of current density 1.7 A/dm(2), the average coating thickness is 0.69 and 1.96 mu m, copper content 9.97% and 23.76%, deposition rate 36.91 and 41.34 mg.min(-1) when electroplated for 30 and 75 min, respectively. Coating thickness and deposition rate increase with the increase of plating time; the copper plating layer nucleation and growth follow the Volmer-Weber mode. |
| WOS标题词 | Science & Technology ; Technology |
| 类目[WOS] | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| 研究领域[WOS] | Materials Science ; Metallurgy & Metallurgical Engineering |
| 关键词[WOS] | COMPOSITES |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000367214200013 |
| 源URL | [http://ir.ipe.ac.cn/handle/122111/20207]  |
| 专题 | 过程工程研究所_研究所（批量导入） |
| 作者单位 | 1.Chinese Acad Sci, Natl Engn Lab Hydromet Cleaner Prod Technol, Beijing 100190, Peoples R China 2.Chinese Acad Sci, Inst Proc Engn, Key Lab Green Proc & Engn, Beijing 100190, Peoples R China 3.Univ Sci & Technol Beijing, Beijing 100083, Peoples R China |
| 推荐引用方式 GB/T 7714 | Wu Peng,Li Jianqiang,Zhou Zhangjian,et al. Copper-Coated Tungsten Powders with Core-Shell Structure Prepared by Intermittent Electrodeposition[J]. RARE METAL MATERIALS AND ENGINEERING,2015,44(S1):47-51. |
| APA | Wu Peng,Li Jianqiang,Zhou Zhangjian,Ma Bingqian,Liu Pengjie,&Wang Man.(2015).Copper-Coated Tungsten Powders with Core-Shell Structure Prepared by Intermittent Electrodeposition.RARE METAL MATERIALS AND ENGINEERING,44(S1),47-51. |
| MLA | Wu Peng,et al."Copper-Coated Tungsten Powders with Core-Shell Structure Prepared by Intermittent Electrodeposition".RARE METAL MATERIALS AND ENGINEERING 44.S1(2015):47-51. |
入库方式： OAI收割
来源：过程工程研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。