一种检测光刻机激光干涉仪测量系统非正交性的新方法
文献类型：期刊论文
| ; | |
| 作者 | 何乐 ; 王向朝 ; 马明英 ; 施伟杰 ; 王帆 |
| 刊名 | 中国激光
 |
| 出版日期 | 2007 |
| 卷号 | 34期号:8页码:1130 |
| 关键词 | 测量 measurement 激光干涉仪 interferometer 非正交性 non-orthogonality 光学对准 optic alignment 工件台 wafer stage 光刻机 lithographic tool |
| ISSN号 | 0258-7025 |
| 其他题名 | Novel Method for Measuring Non-Orthogonality of Interferometer System in Step and Scan Lithographic Tool |
| 中文摘要 | 提出一种精确检测光刻机激光干涉仪测量系统非正交性的新方法。将对准标记曝光到硅片表面并进行显影;利用光学对准系统测量曝光到硅片上的对准标记理论曝光位置与实际读取位置的偏差;由推导的位置偏差与非正交因子、坐标轴尺度比例、过程引入误差的线性模型,根据最小二乘原理计算出干涉仪测量系统的非正交性。实验结果表明,利用该方法使用同一硅片在不同旋转角下进行测量,干涉仪测量系统非正交因子的测量重复精度优于0.01 μrad,坐标轴尺度比例的测量重复精度优于0.7×10-6。使用不同的硅片进行测量,非正交因子的测量再现性优于; A novel method for measuring the non-orthogonality of the interferometer system in a step and scan lithographic tool is presented. First a linear module among the non-orthogonal factor, scaling factor and process related system error has been developed. By real lithographic process the alignment marks are transferred to the wafer, and after development the positions of marks are read out by optic alignment system in the same lithographic tool. The measurement data are used to calculate the non-orthogonal factor and scaling factor of the interferometer by the linear model according to the least square principle. Experimental results show that by this method with the same wafer in different rotation, the measurement repeatability of the non-orthogonal factor is better than 0.01 μrad, and the measurement repeatability of the y to x scaling factor is better than 0.7×10-6. With different wafer in the same condition, the measurement reproducibility of the non-orthogonal factor is better than 0.012 μrad, and the measurement reproducibility of the y to x scaling factor is better than 0.6×10-6. |
| 分类号 | TN305.7 |
| 收录类别 | ei |
| 语种 | 中文 |
| 公开日期 | 2009-09-18 |
| 源URL | [http://ir.siom.ac.cn/handle/181231/2252]  |
| 专题 | 上海光学精密机械研究所_信息光学开放实验室 |
| 推荐引用方式 GB/T 7714 | 何乐,王向朝,马明英,等. 一种检测光刻机激光干涉仪测量系统非正交性的新方法, Novel Method for Measuring Non-Orthogonality of Interferometer System in Step and Scan Lithographic Tool[J]. 中国激光,2007,34(8):1130, 1135. |
| APA | 何乐,王向朝,马明英,施伟杰,&王帆.(2007).一种检测光刻机激光干涉仪测量系统非正交性的新方法.中国激光,34(8),1130. |
| MLA | 何乐,et al."一种检测光刻机激光干涉仪测量系统非正交性的新方法".中国激光 34.8(2007):1130. |
入库方式： OAI收割
来源：上海光学精密机械研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。