Design, development and fabrication for BESIII superconducting muon detector solenoid
文献类型：期刊论文
| 作者 | Wang, B ; Wahrer, B; Taylor, C; Chen, C; Juang, T; Wang, M; Zhu, Z; Chen, H; Xu, S; Yi, C
|
| 刊名 | IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
 |
| 出版日期 | 2005 |
| 卷号 | 15期号:2页码:1263-1266 |
| 关键词 | muon detection rectangular aluminum stabilized Nb-Ti/Cu superconductor wire superconducting thin solenoid 1.0 T central field |
| 通讯作者 | Wang NMR Inc, Livermore, CA 94551 USA ; Inst High Energy Phys, Beijing 100039, Peoples R China |
| 英文摘要 | The BESIII thin superconducting solenoid will generate 1.0 T central field with a field uniformity of 5% within the drift chamber. The superconducting coil winding has an ID of 2962 mm, an OD of 3002 mm and a length of 3550 mm. The overall magnet cryostat has an I.D. of 2750 mm (warm bore), an O.D. of 3390 mm and a length of 3910 mm. Rectangular Aluminum Stabilized Nb-Ti/Cu Superconductor, 3.7 mm x 20 mm, is employed to wind the one-layer coil inside a hoop-force support cylinder. The winding is indirectly cooled by forced-flow two-phase liquid helium. The thermal shield is also indirectly cooled by two-phase liquid nitrogen circulating in a tracing tube. The 4.5 K coil together with its support cylinder weighs 3583 kg. It is supported by twenty-four radial supports and twenty-four axial supports. The supports are designed for electromagnetic de-centering forces of 63.7 kN radial and 122.3 kN axial in addition to a 3 g axial and radial acceleration load. The 80 K thermal shields are supported by eight cold mass supports against 3 g load. The detailed magnet and cryostat design and the design of cold mass support and the coil fabrication process will be discussed. |
| 学科主题 | Engineering; Physics |
| 类目[WOS] | Engineering, Electrical & Electronic ; Physics, Applied |
| 研究领域[WOS] | Engineering ; Physics |
| 原文出处 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000229765700045 |
| 源URL | [http://ir.ihep.ac.cn/handle/311005/239238]  |
| 专题 | 高能物理研究所_实验物理中心 高能物理研究所_加速器中心 |
| 作者单位 | 中国科学院高能物理研究所 |
| 推荐引用方式 GB/T 7714 | Wang, B,Wahrer, B,Taylor, C,et al. Design, development and fabrication for BESIII superconducting muon detector solenoid[J]. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY,2005,15(2):1263-1266. |
| APA | Wang, B.,Wahrer, B.,Taylor, C.,Chen, C.,Juang, T.,...&赵玲.(2005).Design, development and fabrication for BESIII superconducting muon detector solenoid.IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY,15(2),1263-1266. |
| MLA | Wang, B,et al."Design, development and fabrication for BESIII superconducting muon detector solenoid".IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY 15.2(2005):1263-1266. |
入库方式： OAI收割
来源：高能物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。