中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
溶胶-凝胶多孔二氧化硅减反膜稳定性研究

文献类型:期刊论文

;
作者李海元 ; 唐永兴
刊名中国激光
出版日期2005
卷号32期号:6页码:839
关键词薄膜 thin films 溶胶-凝胶 sol-gel 二氧化硅 SiO2 减反膜 antireflective coating 稳定性 stability 疏水性 hydrophobia
ISSN号0258-7025
其他题名Study on stability of porous silica antireflective coatings prepared by sol-gel processing
中文摘要多孔SiO2膜层经热处理后,具有很高的激光破坏阈值,但是结构中有许多Si-OH亲水基团,导致光学透过率受环境相对湿度的影响很大。实验目的是改善膜层内部结构,使膜层结构中的亲水基团转变为疏水基团。提高膜层的疏水性,增强膜层的透过率稳定性。系统地研究了膜层透过率随时间变化的规律,在氨气和六甲基二硅氮烷(HMDS)混合气氛下热处理膜层,处理后生成Si-O-Si(CH2)3非极性疏水基团,使膜层的疏水性大大提高,因而膜层的透过率稳定性有大幅度提高。稳定性的提高延长了膜层的寿命。处理后膜层的表面粗糙度良好,均方根表; Although the porous silica antireflective (AR) coating has high laser damage threshold after heat treatment, its transmission is correlated with environment relative humidity due to many Si-OH hydrophilic groups on the coating surface. The aim of the experiment is to modify internal component, enhance the hydrophobic performance and improve the transmission stability of the films. In this paper, Si-O-Si(CH3)3 non-polar hydrophobic groups appear on the coating surface through atmosphere treatment of ammonia and HMDS (hexamethyl-disilazane), causing hydrophobic performance, thus the stability and life of AR coating are improved greatly. This is very important for coating to use in laser device. The results also show that the coating surface is smooth after above treatment, and its roughness is estimated to be 3.575 for root-mean-square value and 2.850 for average value which meets the precision requirement of large scale laser.
分类号O484
收录类别ei
语种中文
公开日期2009-09-18
源URL[http://ir.siom.ac.cn/handle/181231/2946]  
专题上海光学精密机械研究所_高功率激光物理国家实验室
推荐引用方式
GB/T 7714
李海元,唐永兴. 溶胶-凝胶多孔二氧化硅减反膜稳定性研究, Study on stability of porous silica antireflective coatings prepared by sol-gel processing[J]. 中国激光,2005,32(6):839, 843.
APA 李海元,&唐永兴.(2005).溶胶-凝胶多孔二氧化硅减反膜稳定性研究.中国激光,32(6),839.
MLA 李海元,et al."溶胶-凝胶多孔二氧化硅减反膜稳定性研究".中国激光 32.6(2005):839.

入库方式: OAI收割

来源:上海光学精密机械研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。