利用晶体串接实现高效宽带三倍频
文献类型：期刊论文
| ; | |
| 作者 | 季来林 ; 朱俭 ; 马伟新 ; 詹庭宇 |
| 刊名 | 中国激光
 |
| 出版日期 | 2006 |
| 期号 | s1页码:120 |
| ISSN号 | 0258-7025 |
| 其他题名 | The Dual-Tripler Scheme for Increased-Bandwidth of Third Harmonic Generation in High Power Laser System |
| 中文摘要 | 从耦合波方程出发,分别在小信号、高功率(1.5 GW/cm2)条件下研究KDP晶体串接三次谐波转换。当两块混频晶体的长度选择为8 mm和6 mm,晶体分别偏离原混频匹配角0.35 mrad和-0.25 mrad时可以有0.3 nm的谐波转换带宽,同时系统的三次谐波转换效率与两块混频晶体之间的距离有密切关系,当两块晶体之间的距离使从第一块混频晶体出射的光波之间的相位差改变π时,会使第一块混频晶体产生的三次谐波大部分回流到基频和倍频光,从而使转换效率大幅度下降,最合适的距离应当使光波之间的相位差改变为2π。; The dual-tripler scheme of KDP crystals for third harmonic generation (THG) is studied by the equations of three interacting waves under the small signal and the high power (1.5 GW/cm2) condition. The 8 mm type II KDP tripler with an detuning angle of 0.35 mrad whereby the addition of a 6 mm type II tripler with an detuning angle of -0.25 mrad can increase the bandwidth of third harmonic generation to 0.3 nm at 1.5 GW/cm2. Meanwhile, the conversion efficiency of the third harmonic generation is closely related to the distance between two triplers. If the relative phase among the three interacting waves changes π during the distance, the third harmonics from the first tripler can return to the second harmonics and the fundamental frequency and the conversion efficiency will drop by a wide margin. To ensure the optimum performance of the dual-tripler system, it is necessary to find the correct air gap during which the relative phase among the three interacting waves changes 2π. |
| 分类号 | O437 |
| 语种 | 中文 |
| 公开日期 | 2009-09-18 |
| 源URL | [http://ir.siom.ac.cn/handle/181231/3062]  |
| 专题 | 上海光学精密机械研究所_高功率激光物理国家实验室 |
| 推荐引用方式 GB/T 7714 | 季来林,朱俭,马伟新,等. 利用晶体串接实现高效宽带三倍频, The Dual-Tripler Scheme for Increased-Bandwidth of Third Harmonic Generation in High Power Laser System[J]. 中国激光,2006(s1):120, 123. |
| APA | 季来林,朱俭,马伟新,&詹庭宇.(2006).利用晶体串接实现高效宽带三倍频.中国激光(s1),120. |
| MLA | 季来林,et al."利用晶体串接实现高效宽带三倍频".中国激光 .s1(2006):120. |
入库方式： OAI收割
来源：上海光学精密机械研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。