Effects of upwind area of tube inserts on heat transfer and flow resistance characteristics of turbulent flow
文献类型：期刊论文
| 作者 | Guo, Jian1; Yan, Yuexiang2; Liu, Wei2; Jiang, Fangming1; Fan, Aiwu2 |
| 刊名 | experimental thermal and fluid science
 |
| 出版日期 | 2013-07-01 |
| 卷号 | 48页码:147-155 |
| 关键词 | Upwind area Heat transfer Flow resistance Enhanced tube Conical-strip insert Turbulent flow |
| 英文摘要 | effects of reducing the upwind area of conical-strip tube inserts on heat transfer and friction factor characteristics of turbulent flow are experimentally investigated. the conical-strip insert resembles one quarter of the conical-ring insert in terms of its upwind area. results show that the nusselt number for the case with conical-strip inserts is only 53-56% of that for the case with conical-ring inserts, the friction factor for the former is merely 4-6% of that for the latter, and thus the thermo-hydraulic performance factor can be enhanced by 36-61% if replacing conical-ring inserts with conical-strip inserts for turbulent flow within re range 5000-25,000. in addition, a comparative study of the short conical strip and the t-type conical strip, which can be regarded as boundary-cutting and core-cutting to the normal conical strip respectively, is performed. results indicate that the flow resistance can be reduced by both methods. however, a weakened heat transfer and a worsened thermo-hydraulic performance are obtained for the case with boundary-cutting strip inserts. in contrast, the case with t-type core-cutting conical-strip inserts, if a suitable core-cutting size is taken, shows a better thermo-hydraulic performance as compared with the case with normal conical-strip inserts when the reynolds number is relatively large. effects of the pitch between neighboring strips have also been examined. it is found that smaller pitch leads to higher heat transfer rate whereas the flow resistance is increased. a moderate pitch between conical strips is beneficial to the overall thermo-hydraulic performance. (c) 2013 elsevier inc. all rights reserved. |
| WOS标题词 | science & technology ; physical sciences ; technology |
| 类目[WOS] | thermodynamics ; engineering, mechanical ; physics, fluids & plasmas |
| 研究领域[WOS] | thermodynamics ; engineering ; physics |
| 关键词[WOS] | twisted-tape elements ; friction factor characteristics ; pressure-drop correlations ; conical strip inserts ; laminar-flow ; thermohydraulic characteristics ; transfer behaviors ; ring turbulators ; isothermal tubes ; performance |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000319536900017 |
| 源URL | [http://ir.giec.ac.cn/handle/344007/10090]  |
| 专题 | 中国科学院广州能源研究所 |
| 作者单位 | 1.Chinese Acad Sci, Guangzhou Inst Energy Convers, Key Lab Renewable Energy & Gas Hydrate, Lab Adv Energy Syst, Guangzhou 510640, Guangdong, Peoples R China 2.Huazhong Univ Sci & Technol, Sch Energy & Power Engn, Wuhan 430074, Peoples R China |
| 推荐引用方式 GB/T 7714 | Guo, Jian,Yan, Yuexiang,Liu, Wei,et al. Effects of upwind area of tube inserts on heat transfer and flow resistance characteristics of turbulent flow[J]. experimental thermal and fluid science,2013,48:147-155. |
| APA | Guo, Jian,Yan, Yuexiang,Liu, Wei,Jiang, Fangming,&Fan, Aiwu.(2013).Effects of upwind area of tube inserts on heat transfer and flow resistance characteristics of turbulent flow.experimental thermal and fluid science,48,147-155. |
| MLA | Guo, Jian,et al."Effects of upwind area of tube inserts on heat transfer and flow resistance characteristics of turbulent flow".experimental thermal and fluid science 48(2013):147-155. |
入库方式： OAI收割
来源：广州能源研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。