Acceleration feedback of a CCD-based tracking loop for fast steering mirror
文献类型：期刊论文
| 作者 | Tang Tao; Huang YongmEi; Fu Chengyu; Liu Shunfa |
| 刊名 | Optical Engineering
 |
| 出版日期 | 2009 |
| 卷号 | 48期号:1页码:13001 |
| 通讯作者 | Tang Tao |
| 中文摘要 | In the control system of a CCD-based tracking loop for a fast steering mirror (FSM), the most effective method often employed to improve pointing performance is to increase high gain of the control system for a high bandwidth, which, however, usually suffers a great deal from a low CCD sampling rate and the mechanics of the FSM. Moreover, the amount of time delay engendered by sampling and data processing can significantly reduce the performance of a closed-loop system. Therefore, a tentative approach to the implementation of a CCD-based tracking control system with acceleration feedback is proposed. In theory, the position open loop is made of double integrators with a high bandwidth of the acceleration feedback loop; in fact, however, the acceleration open loop of the FSM response includes a quadratic differential, and it is very difficult to compensate a quadratic differential with an integral algorithm. To solve this problem, a novel acceleration closed system such as a bandpass filter is proposed. The position is reconstructed into a simple first-order filter instead of a third-order control system. In addition experimental results show that the acceleration feedback proposed here can effectively enhance the bandwidth of the closed-loop system and its trajectory tracking and pointing performance. |
| 英文摘要 | In the control system of a CCD-based tracking loop for a fast steering mirror (FSM), the most effective method often employed to improve pointing performance is to increase high gain of the control system for a high bandwidth, which, however, usually suffers a great deal from a low CCD sampling rate and the mechanics of the FSM. Moreover, the amount of time delay engendered by sampling and data processing can significantly reduce the performance of a closed-loop system. Therefore, a tentative approach to the implementation of a CCD-based tracking control system with acceleration feedback is proposed. In theory, the position open loop is made of double integrators with a high bandwidth of the acceleration feedback loop; in fact, however, the acceleration open loop of the FSM response includes a quadratic differential, and it is very difficult to compensate a quadratic differential with an integral algorithm. To solve this problem, a novel acceleration closed system such as a bandpass filter is proposed. The position is reconstructed into a simple first-order filter instead of a third-order control system. In addition experimental results show that the acceleration feedback proposed here can effectively enhance the bandwidth of the closed-loop system and its trajectory tracking and pointing performance. |
| 收录类别 | SCI ; EI |
| 语种 | 英语 |
| 源URL | [http://ir.ioe.ac.cn/handle/181551/4051]  |
| 专题 | 光电技术研究所_光电工程总体研究室（一室） |
| 作者单位 | 中国科学院光电技术研究所 |
| 推荐引用方式 GB/T 7714 | Tang Tao,Huang YongmEi,Fu Chengyu,et al. Acceleration feedback of a CCD-based tracking loop for fast steering mirror[J]. Optical Engineering,2009,48(1):13001. |
| APA | Tang Tao,Huang YongmEi,Fu Chengyu,&Liu Shunfa.(2009).Acceleration feedback of a CCD-based tracking loop for fast steering mirror.Optical Engineering,48(1),13001. |
| MLA | Tang Tao,et al."Acceleration feedback of a CCD-based tracking loop for fast steering mirror".Optical Engineering 48.1(2009):13001. |
入库方式： OAI收割
来源：光电技术研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。