Fault tolerance control of phase current in permanent magnet synchronous motor control system
文献类型：会议论文
| 作者 | Chen, Kele1,2,3; Chan, Ke2,3; Chen, Xinglong2,3; Li, Jinying2,3 |
| 出版日期 | 2014 |
| 会议名称 | Proceedings of SPIE: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Smart Structures and Materials for Manufacturing and Testing |
| 会议日期 | 2014 |
| 卷号 | 9285 |
| 页码 | 92850E |
| 中文摘要 | As the Photoelectric tracking system develops from earth based platform to all kinds of moving platform such as plane based, ship based, car based, satellite based and missile based, the fault tolerance control system of phase current sensor is studied in order to detect and control of failure of phase current sensor on a moving platform. By using a DC-link current sensor and the switching state of the corresponding SVPWM inverter, the failure detection and fault control of three phase current sensor is achieved. Under such conditions as one failure, two failures and three failures, fault tolerance is able to be controlled. The reason why under the method, there exists error between fault tolerance control and actual phase current, is analyzed, and solution to weaken the error is provided. The experiment based on permanent magnet synchronous motor system is conducted, and the method is proven to be capable of detecting the failure of phase current sensor effectively and precisely, and controlling the fault tolerance simultaneously. With this method, even though all the three phase current sensors malfunction, the moving platform can still work by reconstructing the phase current of the motor. |
| 英文摘要 | As the Photoelectric tracking system develops from earth based platform to all kinds of moving platform such as plane based, ship based, car based, satellite based and missile based, the fault tolerance control system of phase current sensor is studied in order to detect and control of failure of phase current sensor on a moving platform. By using a DC-link current sensor and the switching state of the corresponding SVPWM inverter, the failure detection and fault control of three phase current sensor is achieved. Under such conditions as one failure, two failures and three failures, fault tolerance is able to be controlled. The reason why under the method, there exists error between fault tolerance control and actual phase current, is analyzed, and solution to weaken the error is provided. The experiment based on permanent magnet synchronous motor system is conducted, and the method is proven to be capable of detecting the failure of phase current sensor effectively and precisely, and controlling the fault tolerance simultaneously. With this method, even though all the three phase current sensors malfunction, the moving platform can still work by reconstructing the phase current of the motor. |
| 收录类别 | EI |
| 学科主题 | Control systems - Fault detection - Flight control systems - Magnets - Manufacture - Materials testing - Permanent magnets - Photoelectricity - Synchronous motors - Vector control (Electric machinery) |
| 语种 | 英语 |
| ISSN号 | 0277786X |
| 源URL | [http://ir.ioe.ac.cn/handle/181551/7414]  |
| 专题 | 光电技术研究所_光电工程总体研究室（一室） |
| 作者单位 | 1.University of Chinese Academy of Sciences, Beijing, China 2.Institute of Optics and Electronics Chinese Academy of Sciences, Chengdu, China 3.Key Laboratory of Beam Control, Chengdu, China |
| 推荐引用方式 GB/T 7714 | Chen, Kele,Chan, Ke,Chen, Xinglong,et al. Fault tolerance control of phase current in permanent magnet synchronous motor control system[C]. 见:Proceedings of SPIE: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Smart Structures and Materials for Manufacturing and Testing. 2014. |
入库方式： OAI收割
来源：光电技术研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。