Error analysis of laser beam quality measured with CCD sensor and choice of the optimal threshold
文献类型：期刊论文
| 作者 | He, Yuanxing1,2,3; Li, Xinyang2,3 |
| 刊名 | Optics and Laser Technology
 |
| 出版日期 | 2013 |
| 卷号 | 45期号:1页码:671-677 |
| ISSN号 | 00303992 |
| 通讯作者 | He, Y. (yuanxing-he@163.com) |
| 中文摘要 | Accurate measurement of beam quality is very important in different areas of laser applications. Take the far-field Gaussian spot as an example, the calculation error formulas of peak Strehl ratio and beam quality factor β are derived in the present of various error sources, such as background photon noise, CCD pixels non-ideal sampling, CCD dark voltage, read-out noise of CCD, signal photon noise and measurement window size. The calculation errors of laser beam quality changing with various error sources are presented in theory and the corresponding numerically simulated results are given. Theoretical and simulated results show that when the threshold is set at NB¯ σB, with NB¯ standing for average value of the error sources and σB standing for mean-square value of the fluctuation in error sources, the lowest calculating error of laser beam quality could be achieved. © 2012 Elsevier Ltd. |
| 英文摘要 | Accurate measurement of beam quality is very important in different areas of laser applications. Take the far-field Gaussian spot as an example, the calculation error formulas of peak Strehl ratio and beam quality factor β are derived in the present of various error sources, such as background photon noise, CCD pixels non-ideal sampling, CCD dark voltage, read-out noise of CCD, signal photon noise and measurement window size. The calculation errors of laser beam quality changing with various error sources are presented in theory and the corresponding numerically simulated results are given. Theoretical and simulated results show that when the threshold is set at NB¯ σB, with NB¯ standing for average value of the error sources and σB standing for mean-square value of the fluctuation in error sources, the lowest calculating error of laser beam quality could be achieved. © 2012 Elsevier Ltd. |
| 学科主题 | Beam quality - Laser applications - Laser beams - Photons - Sensors - Signal sampling |
| 收录类别 | SCI ; EI |
| 语种 | 英语 |
| WOS记录号 | WOS:000310401800101 |
| 源URL | [http://ir.ioe.ac.cn/handle/181551/6361]  |
| 专题 | 光电技术研究所_自适应光学技术研究室（八室） |
| 作者单位 | 1.College of Optoelectronic Science and Engineering, National University of Defense Technology, Changsha 410073, China 2.Institute of Optics and Electronics, Chinese Academy of Science, Chengdu, Sichuan 610209, China 3.Key Laboratory on Adaptive Optics, Chinese Academy of Science, Chengdu, Sichuan 610209, China |
| 推荐引用方式 GB/T 7714 | He, Yuanxing,Li, Xinyang. Error analysis of laser beam quality measured with CCD sensor and choice of the optimal threshold[J]. Optics and Laser Technology,2013,45(1):671-677. |
| APA | He, Yuanxing,&Li, Xinyang.(2013).Error analysis of laser beam quality measured with CCD sensor and choice of the optimal threshold.Optics and Laser Technology,45(1),671-677. |
| MLA | He, Yuanxing,et al."Error analysis of laser beam quality measured with CCD sensor and choice of the optimal threshold".Optics and Laser Technology 45.1(2013):671-677. |
入库方式： OAI收割
来源：光电技术研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。