Effect of tungsten content on the microstructure and tensile properties of Ni-xW-6Cr alloys
文献类型：期刊论文
| 作者 | Liu, SL; Ye, XX; Jiang, L; Cui, CY; Li, ZJ; Huang, HF; Leng, B; Zhou, XT |
| 刊名 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 |
| 出版日期 | 2016 |
| 卷号 | 655期号:-页码:269—276 |
| 关键词 | STACKING-FAULT ENERGY ULTRAFINE-GRAINED CU MECHANICAL-PROPERTIES HIGH DUCTILITY BEHAVIOR SYSTEMS |
| ISSN号 | 0921-5093 |
| 通讯作者 | Ye, XX ; Li, ZJ ; Zhou, XT (reprint author), Chinese Acad Sci, Shanghai Inst Appl Phys, Ctr Thorium Molten Salt Reactor Syst, Shanghai 201800, PR, Peoples R China. |
| 英文摘要 | Ni-xW-6Cr alloys have been considered as one of the potential structural materials for molten salt techniques, whereas their microstructure and mechanical performance have not been sufficiently studied. In this study, the microstructure and tensile deformation behavior of Ni-(10-35 wt%)W-6Cr alloys have been systematically investigated. The phase diagram calculations indicated that the solubility limit of W is 34 wt% in Ni-xW-6Cr alloy. alpha-W phase is formed in the matrix while the W content exceeds such limit. The fracture of the Ni-(10-35 wt%)W-6Cr alloys at room temperature is in the transgranular ductile fracture mode. The tensile properties of alloys, except for the elongation of Ni-35 wt%W-6Cr alloy, are improved with the increase of W content, which can be explained by the larger lattice distortion, the lower stack fault energy and the higher length fraction of twin boundaries (Sigma 3 and Sigma 9 type) in the Ni-(10-35 wt%)W-6Cr alloys caused by the addition of more W. The reduced elongation of the Ni-35 wt%W-6Cr alloy is ascribed to the particles in alpha-W phase which act as the main nucleation sites for cracking. (C) 2016 Elsevier B.V. All rights reserved. |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000370103000032 |
| 源URL | [http://ir.sinap.ac.cn/handle/331007/25701]  |
| 专题 | 上海应用物理研究所_中科院上海应用物理研究所2011-2017年 |
| 推荐引用方式 GB/T 7714 | Liu, SL,Ye, XX,Jiang, L,et al. Effect of tungsten content on the microstructure and tensile properties of Ni-xW-6Cr alloys[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2016,655(-):269—276. |
| APA | Liu, SL.,Ye, XX.,Jiang, L.,Cui, CY.,Li, ZJ.,...&Zhou, XT.(2016).Effect of tungsten content on the microstructure and tensile properties of Ni-xW-6Cr alloys.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,655(-),269—276. |
| MLA | Liu, SL,et al."Effect of tungsten content on the microstructure and tensile properties of Ni-xW-6Cr alloys".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 655.-(2016):269—276. |
入库方式： OAI收割
来源：上海应用物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。