Opto-mechanical design and analysis of dual-band sharing aperture imaging system
文献类型:期刊论文
作者 | Cheng, Z.; F. Liu and X. Xun |
刊名 | Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering
![]() |
出版日期 | 2015 |
卷号 | 44期号:11页码:3366-3372 |
英文摘要 | In order to overcome the shortcomings of the airborne photoelectric payloads (visible light cameras and infrared thermal imager), which has too short focal length and independent with each other, the visible light/infrared sharing aperture system key technology were studied. With visible light and medium wave infrared dual band sharing the primary and secondary mirror, the optical system focal lengths were 1500 mm and 750 mm respectively for the visible light and infrared wave. By choosing appropriate optical material and the reasonable support method, the system reflector support component's static and dynamic models were designed, the structure form was optimized. The thermal-structural-optical integrated analysis method was used to guide, evaluate and optimize the opto-mechanical systems design process, improve the natural frequency of the structure and enhance thermal stability range. The fundamental frequency of the structure is greater than 200 Hz, the surface precision of the system reflector reaches PV of /10 and RMS of /40. The optical system modulation transfer function (MTF) reaches 0.38 under influence of deadweight and uniform temperature change of 5. The results indicate that the proposed design can meet the requirements of high structure natural frequency, the gravity and thermal coupling deformation, vibration resistance, etc, and the system has good imaging quality. 2015, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved. |
收录类别 | EI |
源URL | [http://ir.ciomp.ac.cn/handle/181722/56255] ![]() |
专题 | 长春光学精密机械与物理研究所_中科院长春光机所知识产出 |
推荐引用方式 GB/T 7714 | Cheng, Z.,F. Liu and X. Xun. Opto-mechanical design and analysis of dual-band sharing aperture imaging system[J]. Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,2015,44(11):3366-3372. |
APA | Cheng, Z.,&F. Liu and X. Xun.(2015).Opto-mechanical design and analysis of dual-band sharing aperture imaging system.Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering,44(11),3366-3372. |
MLA | Cheng, Z.,et al."Opto-mechanical design and analysis of dual-band sharing aperture imaging system".Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering 44.11(2015):3366-3372. |
入库方式: OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。