Topology optimization design for inner frame of aerial remote sensing inertially stabilized platform
文献类型：期刊论文
| 作者 | Liu, Z.-Y.; T. Zhang; J.-Y. Liu; Y.-G. Li and P. Wang |
| 刊名 | Zhongguo Guanxing Jishu Xuebao/Journal of Chinese Inertial Technology
 |
| 出版日期 | 2015 |
| 卷号 | 23期号:4页码:429-433 |
| 英文摘要 | In order to improve the dynamic performance of inertially stabilized platform for aerial remote sensing and reduce the negative effect of vibration environment on image quality of electro-optical load, a topology optimization based on the variable density theory was studied. In the topology optimization of the inner frame of aerial remote sensing inertially stabilized platform, the minimum compliance of weighted structure was taken as an objective function, and the node deformation and volume ratio constraint were taken as response functions by using the software of NX/TOSCA. Based on the optimization results, the inner frame structure was designed, and it was analyzed with the software of NX/Nastran. The results of static analysis show that the maximum deformation of the inner frame structure is 3.5 m, which meets the requirements of the pointing error distribution. The modal analysis results show that the first-order natural frequency of the inner frame structure is increased to 334 Hz from 260 Hz, thus the stiffness of the inner frame structure meets the servo bandwidth's requirements. By the topology optimization design, the mass of the inner frame is reduced to 1.8 kg from 3.6 kg, which is beneficial to the realization of lightweight design. At last, the simulation analysis is verified by the pointing accuracy stabilized accuracy test and the flight test, which indicates that the topology optimization design of the inner frame is successful. 2015, Editorial Department of Journal of Chinese Inertial Technology. All right reserved. |
| 收录类别 | EI |
| 源URL | [http://ir.ciomp.ac.cn/handle/181722/56362]  |
| 专题 | 长春光学精密机械与物理研究所_中科院长春光机所知识产出 |
| 推荐引用方式 GB/T 7714 | Liu, Z.-Y.,T. Zhang,J.-Y. Liu,et al. Topology optimization design for inner frame of aerial remote sensing inertially stabilized platform[J]. Zhongguo Guanxing Jishu Xuebao/Journal of Chinese Inertial Technology,2015,23(4):429-433. |
| APA | Liu, Z.-Y.,T. Zhang,J.-Y. Liu,&Y.-G. Li and P. Wang.(2015).Topology optimization design for inner frame of aerial remote sensing inertially stabilized platform.Zhongguo Guanxing Jishu Xuebao/Journal of Chinese Inertial Technology,23(4),429-433. |
| MLA | Liu, Z.-Y.,et al."Topology optimization design for inner frame of aerial remote sensing inertially stabilized platform".Zhongguo Guanxing Jishu Xuebao/Journal of Chinese Inertial Technology 23.4(2015):429-433. |
入库方式： OAI收割
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。