大口径光学元件精密加工温差分析及控制方法
文献类型：期刊论文
| 作者 | 焦翔; 朱健强; 樊全堂; 李养帅 |
| 刊名 | 中国激光
 |
| 出版日期 | 2014 |
| 卷号 | 41期号:11页码:1116001 |
| 关键词 | 光学制造 温差控制 大口径光学元件 环形抛光 精密加工 绝热 |
| 其他题名 | Temperature Difference Analysis and Control Methods in Precision Finishing of Large-Aperture Optical Component |
| 通讯作者 | Jiao Xiang, Key Laboratory on High Power Laser and Physics,Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. ; Zhu Jianqiang, Key Laboratory on High Power Laser and Physics,Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. ; Fan Quantang, Key Laboratory on High Power Laser and Physics,Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. ; Li Yangshuai, Key Laboratory on High Power Laser and Physics,Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. |
| 中文摘要 | 针对大口径光学元件精密加工时上下表面存在温差的问题,以环形抛光系统为例,对拋光盘和工件温度特性进行了研究。在1.6 m环形抛光机上对工件温度进行了测定,结果表明即使在低速抛光情况下工件上下表面也会产生较大的温差。提出了合理搭配工艺参数和对工件非加工面绝热两种温差控制方法。通过采用控制变量法和对工件绝热抛光法进行测温实验验证了方案的可行性,为高精度面形加工奠定了基础。 |
| 英文摘要 | Aiming at the problem that the large-aperture optical component exists difference in temperature between the top and the bottom surfaces in precision finishing, the temperature property of the polishing pad and the workpiece, taking the annular lapping system for example, have been investigated. Significant temperature difference between the top and the bottom surfaces of the optical component is measured even at low rotating speed polishing applying the 1.6 m annular polishing machine. Two effective methods are proposed, one is adjusting the technological parameters, the other is adiabatic polishing. The feasibility of the methods is confirmed by the temperature measurement experiments using control variable and adiabatic polishing. The proposed methods lay the foundation of precision finishing. |
| 收录类别 | EI |
| 原文出处 | http://www.opticsjournal.net |
| 语种 | 中文 |
| 版本 | 出版稿 |
| 源URL | [http://ir.siom.ac.cn/handle/181231/12524]  |
| 专题 | 上海光学精密机械研究所_高功率激光物理国家实验室 |
| 作者单位 | 1.焦翔, 中国科学院上海光学精密机械研究所, 中科院高功率激光物理重点实验室, 上海 201800, 中国. 2.朱健强, 中国科学院上海光学精密机械研究所, 中科院高功率激光物理重点实验室, 上海 201800, 中国. 3.樊全堂, 中国科学院上海光学精密机械研究所, 中科院高功率激光物理重点实验室, 上海 201800, 中国. 4.李养帅, 中国科学院上海光学精密机械研究所, 中科院高功率激光物理重点实验室, 上海 201800, 中国. |
| 推荐引用方式 GB/T 7714 | 焦翔,朱健强,樊全堂,等. 大口径光学元件精密加工温差分析及控制方法[J]. 中国激光,2014,41(11):1116001. |
| APA | 焦翔,朱健强,樊全堂,&李养帅.(2014).大口径光学元件精密加工温差分析及控制方法.中国激光,41(11),1116001. |
| MLA | 焦翔,et al."大口径光学元件精密加工温差分析及控制方法".中国激光 41.11(2014):1116001. |
入库方式： OAI收割
来源：上海光学精密机械研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。