Design and analysis on a kind of primary reflector support structure based on thermal compensation principle
文献类型：会议论文
| 作者 | Yan, Conglin1,2; Liu, Weilin1; Wu, Qinzhang1 |
| 出版日期 | 2012 |
| 会议名称 | Proceedings of SPIE: 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes |
| 会议日期 | 2012 |
| 卷号 | 8415 |
| 页码 | 841511 |
| 通讯作者 | Yan, C. |
| 中文摘要 | While the diameter of primary mirror becomes lager and lager, the accuracy of surface shape becomes extremely sensitive to gravity and temperature. The support structure has great significance to improve the imaging quality. The accuracy of surface shape can be improved by increasing the stiffness of support structure. However, high stiffness will decrease the structure's thermal stability. To improve the imaging quality under thermal environment, the structure should have reasonable flexibility. The problem is that, the support structure of a primary mirror can't keep both high rigidity and fine thermal stability. To solve this problem, a flexible and thermal compensation structure was introduced and the parameter was optimized in this paper. After the analysis of the surface accuracy by Finite Element Method (FEM) was carried out, the RMS value of surface precision decreased from the original 67.3nm to 12.6nm when the mirror working at thermal and self-gravity circumstance. The analysis results meet the requirement of the imaging quality. It indicates that thermal compensation structure can effectively improve the reflector's surface shape accuracy under the effect of the gravity and thermal load. © 2012 SPIE. |
| 英文摘要 | While the diameter of primary mirror becomes lager and lager, the accuracy of surface shape becomes extremely sensitive to gravity and temperature. The support structure has great significance to improve the imaging quality. The accuracy of surface shape can be improved by increasing the stiffness of support structure. However, high stiffness will decrease the structure's thermal stability. To improve the imaging quality under thermal environment, the structure should have reasonable flexibility. The problem is that, the support structure of a primary mirror can't keep both high rigidity and fine thermal stability. To solve this problem, a flexible and thermal compensation structure was introduced and the parameter was optimized in this paper. After the analysis of the surface accuracy by Finite Element Method (FEM) was carried out, the RMS value of surface precision decreased from the original 67.3nm to 12.6nm when the mirror working at thermal and self-gravity circumstance. The analysis results meet the requirement of the imaging quality. It indicates that thermal compensation structure can effectively improve the reflector's surface shape accuracy under the effect of the gravity and thermal load. © 2012 SPIE. |
| 收录类别 | EI |
| 语种 | 英语 |
| ISSN号 | 0277786X |
| 源URL | [http://ir.ioe.ac.cn/handle/181551/7540]  |
| 专题 | 光电技术研究所_光电探测技术研究室（三室） |
| 作者单位 | 1.Institute of Optics and Electronics, Chinese Academy of Sciences, Chendu 610209, China 2.Graduate School, Chinese Academy of Sciences, Beijing 100039, China |
| 推荐引用方式 GB/T 7714 | Yan, Conglin,Liu, Weilin,Wu, Qinzhang. Design and analysis on a kind of primary reflector support structure based on thermal compensation principle[C]. 见:Proceedings of SPIE: 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes. 2012. |
入库方式： OAI收割
来源：光电技术研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。