Experimental study of grinding removal efficiency in optical processing for using NC manipulator
文献类型：会议论文
| 作者 | Zhang, Wei1,2; Zeng, Zhige1; Wu, Fan1; Zhuo, Bin1 |
| 出版日期 | 2012 |
| 会议名称 | Proceedings of SPIE: 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies |
| 会议日期 | 2012 |
| 卷号 | 8416 |
| 页码 | 841626 |
| 通讯作者 | Zhang, W. |
| 中文摘要 | The manipulator is a simple numerical simulation of artificial which was used in manufacturing the mirror. It can be control by the computer to adjust the lap rev and speed, to achieve quantitative removal. In the processing of large-diameter primary mirror, we used a combination according to the actual situation of the processing method. Usually two or even more manipulators were used. The method is more efficiency than the traditional CCOS processing. In this paper, the various factors which affecting the removal efficiency of manipulator were experimented. After analyzing the experiment data, the best match parameter can be found. Use this best parameter in actual processing of large-diameter mirror, the efficiency was improved a lot. © 2012 SPIE. |
| 英文摘要 | The manipulator is a simple numerical simulation of artificial which was used in manufacturing the mirror. It can be control by the computer to adjust the lap rev and speed, to achieve quantitative removal. In the processing of large-diameter primary mirror, we used a combination according to the actual situation of the processing method. Usually two or even more manipulators were used. The method is more efficiency than the traditional CCOS processing. In this paper, the various factors which affecting the removal efficiency of manipulator were experimented. After analyzing the experiment data, the best match parameter can be found. Use this best parameter in actual processing of large-diameter mirror, the efficiency was improved a lot. © 2012 SPIE. |
| 收录类别 | EI |
| 语种 | 英语 |
| ISSN号 | 0277786X |
| 源URL | [http://ir.ioe.ac.cn/handle/181551/7584]  |
| 专题 | 光电技术研究所_先光中心 |
| 作者单位 | 1.Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu, Sichuan 610209, China 2.Graduate University, Chinese Academy of Sciences, Beijing 100039, China |
| 推荐引用方式 GB/T 7714 | Zhang, Wei,Zeng, Zhige,Wu, Fan,et al. Experimental study of grinding removal efficiency in optical processing for using NC manipulator[C]. 见:Proceedings of SPIE: 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies. 2012. |
入库方式： OAI收割
来源：光电技术研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。