Elimination of the "imprinting effect" of the lightweight aspheric polished by CCAL technology using immersed inflation
文献类型：会议论文
| 作者 | Zhong, Xianyun; Xu, Qinglan; Fan, Bin; Zhou, Jiabin |
| 出版日期 | 2012 |
| 会议名称 | Proceedings of SPIE: 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies |
| 会议日期 | 2012 |
| 卷号 | 8416 |
| 页码 | 841629 |
| 通讯作者 | Zhong, X. |
| 中文摘要 | In order to reduce the quality of overall optical system and improve the capability of correcting aberration, amending image quality and expanding the field of view. The optical components of optical systems are trending to the lightweight aspheric with larger radius to thickness ratio. For improving the processing efficiently and restraining the mid-high frequency error, Computer Control Active Lap (CCAL) technology has become a significant method for processing. However, when the surface accuracy RMS of lightweight mirrors is lower than λ / 40 (λ = 632.8nm), the lightweight mirror surface will appear "imprinting effect" stripes caused by Active Lap, and this phenomena has become the barriers for high-precision processing and the development of lightweight mirrors. In this paper, based on the Finite Element Analysis (FEA) software, taking an innovative way that applies reverse air to the internal structure of lightweight mirrors to resist the elastic deflection derived from the lap pressure and self-weight. And, comparing two methods: cavity inflation and immersed inflation, simulation results show that the immersion inflation method not only can eliminate the "imprinting effect, but also the surface accuracy of mirrors is much better than that only caused by selfweight during polishing process. © 2012 SPIE. |
| 英文摘要 | In order to reduce the quality of overall optical system and improve the capability of correcting aberration, amending image quality and expanding the field of view. The optical components of optical systems are trending to the lightweight aspheric with larger radius to thickness ratio. For improving the processing efficiently and restraining the mid-high frequency error, Computer Control Active Lap (CCAL) technology has become a significant method for processing. However, when the surface accuracy RMS of lightweight mirrors is lower than λ / 40 (λ = 632.8nm), the lightweight mirror surface will appear "imprinting effect" stripes caused by Active Lap, and this phenomena has become the barriers for high-precision processing and the development of lightweight mirrors. In this paper, based on the Finite Element Analysis (FEA) software, taking an innovative way that applies reverse air to the internal structure of lightweight mirrors to resist the elastic deflection derived from the lap pressure and self-weight. And, comparing two methods: cavity inflation and immersed inflation, simulation results show that the immersion inflation method not only can eliminate the "imprinting effect, but also the surface accuracy of mirrors is much better than that only caused by selfweight during polishing process. © 2012 SPIE. |
| 收录类别 | EI |
| 语种 | 英语 |
| ISSN号 | 0277786X |
| 源URL | [http://ir.ioe.ac.cn/handle/181551/7586]  |
| 专题 | 光电技术研究所_先光中心 |
| 作者单位 | Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu 610209, China |
| 推荐引用方式 GB/T 7714 | Zhong, Xianyun,Xu, Qinglan,Fan, Bin,et al. Elimination of the "imprinting effect" of the lightweight aspheric polished by CCAL technology using immersed inflation[C]. 见:Proceedings of SPIE: 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies. 2012. |
入库方式： OAI收割
来源：光电技术研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。