The Thin Mirror Deformation and Stress Distribution Analysis Based on Different Influence Functions
文献类型：会议论文
| 作者 | Wang, Hongqiao; Fan, Bin; Wu, Yongqian; Liu, Haitao; Liu, Rong |
| 出版日期 | 2014 |
| 会议名称 | Proceedings of SPIE: 7TH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGIES: ADVANCED OPTICAL MANUFACTURING TECHNOLOGIES |
| 会议日期 | 2014 |
| 卷号 | 9281 |
| 页码 | 92811W |
| 通讯作者 | Wang, HQ (reprint author), Chinese Acad Sci, Inst Opt & Elect, Chengdu 610209, Peoples R China. |
| 中文摘要 | The active support technique can be applied in the fabrication of large thin meniscus mirror. It can reduce the grinding and polishing difficulty for thin mirror. Compare between two kinds of influence function, we correct the Zernike 5th, 6th, 10th and 11th mode deformation. The low-order Zernike modes which are prone to appearing during large primary mirror processing are revised with active support technology. Influence functions are expressed with Z coordinate value and Zernike coefficient of surface shape. This paper reports that respectively adopting different influence functions to solve correction forces and the correction forces compensates specific Zernike modes of mirror deformation. After comparing the PV and RMS values of amendatory residual of surface shape, we analyze the effect of different correction forces to the biggest stress on the underside of the primary mirror. We compare the two methods based on the PV and RMS values of the residual error and the Max-stress. Gain a conclusion that correction forces obtained from Z coordinate value of surface shape is superior to the one obtained from the Zernike coefficient of surface shape. |
| 英文摘要 | The active support technique can be applied in the fabrication of large thin meniscus mirror. It can reduce the grinding and polishing difficulty for thin mirror. Compare between two kinds of influence function, we correct the Zernike 5th, 6th, 10th and 11th mode deformation. The low-order Zernike modes which are prone to appearing during large primary mirror processing are revised with active support technology. Influence functions are expressed with Z coordinate value and Zernike coefficient of surface shape. This paper reports that respectively adopting different influence functions to solve correction forces and the correction forces compensates specific Zernike modes of mirror deformation. After comparing the PV and RMS values of amendatory residual of surface shape, we analyze the effect of different correction forces to the biggest stress on the underside of the primary mirror. We compare the two methods based on the PV and RMS values of the residual error and the Max-stress. Gain a conclusion that correction forces obtained from Z coordinate value of surface shape is superior to the one obtained from the Zernike coefficient of surface shape. |
| 学科主题 | Active support; Zernike mode; FEA; Thin mirror |
| 语种 | 英语 |
| ISSN号 | 0277-786X |
| 源URL | [http://ir.ioe.ac.cn/handle/181551/7610]  |
| 专题 | 光电技术研究所_先光中心 |
| 作者单位 | 1.[Wang, Hongqiao 2.Fan, Bin 3.Wu, Yongqian 4.Liu, Haitao 5.Liu, Rong] Chinese Acad Sci, Inst Opt & Elect, Chengdu 610209, Peoples R China |
| 推荐引用方式 GB/T 7714 | Wang, Hongqiao,Fan, Bin,Wu, Yongqian,et al. The Thin Mirror Deformation and Stress Distribution Analysis Based on Different Influence Functions[C]. 见:Proceedings of SPIE: 7TH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGIES: ADVANCED OPTICAL MANUFACTURING TECHNOLOGIES. 2014. |
入库方式： OAI收割
来源：光电技术研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。