A sampling method to measure surface roughness of circular flat
文献类型：会议论文
| 作者 | Meng, Kai1,2; Wan, Yongjian1; Wu, Fan1; Shen, Lijun1,2; Song, Weihong1,2 |
| 出版日期 | 2014 |
| 会议名称 | Proceedings of SPIE: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment |
| 会议日期 | 2014 |
| 卷号 | 9282 |
| 页码 | 92820J |
| 中文摘要 | We propose a sampling method to measure surface roughness of circular flat in this paper. The steps of this method are described in following. First, the number of sampling points is determined based on the radius of the circular flat; then the sampling points are selected by a certain angle in helical line; at last we use instrument like white light interferometer to measure the surface roughness of these sample points. The sampling method can effectively use the surface roughness of sampling points to estimate the surface roughness of the overall optical surface. According to mathematic derivation and simulation analysis, this method has a good sampling results, thus it can be widely used to measure the surface roughness of the circular flat. © 2014 SPIE. |
| 英文摘要 | We propose a sampling method to measure surface roughness of circular flat in this paper. The steps of this method are described in following. First, the number of sampling points is determined based on the radius of the circular flat; then the sampling points are selected by a certain angle in helical line; at last we use instrument like white light interferometer to measure the surface roughness of these sample points. The sampling method can effectively use the surface roughness of sampling points to estimate the surface roughness of the overall optical surface. According to mathematic derivation and simulation analysis, this method has a good sampling results, thus it can be widely used to measure the surface roughness of the circular flat. © 2014 SPIE. |
| 收录类别 | EI |
| 学科主题 | Manufacture - Optical testing - Surface measurement |
| 语种 | 英语 |
| ISSN号 | 0277786X |
| 源URL | [http://ir.ioe.ac.cn/handle/181551/7624]  |
| 专题 | 光电技术研究所_先光中心 |
| 作者单位 | 1.Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu, China 2.University of Chinese Academy of Sciences, Beijing, China |
| 推荐引用方式 GB/T 7714 | Meng, Kai,Wan, Yongjian,Wu, Fan,et al. A sampling method to measure surface roughness of circular flat[C]. 见:Proceedings of SPIE: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment. 2014. |
入库方式： OAI收割
来源：光电技术研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。