Design and simulation of the active support system for a 1.2m meniscus primary mirror
文献类型：会议论文
| 作者 | Liu, Haitao; Fan, Bin; Zeng, Zhige; Li, Xiaojin; Wang, Hongqiao; Liu, Rong |
| 出版日期 | 2015 |
| 会议名称 | Proceedings of SPIE - The International Society for Optical Engineering |
| 会议日期 | 2015 |
| 卷号 | 9524 |
| 页码 | 95240R |
| 中文摘要 | Thin meniscus primary mirrors with active support have been used successfully in many large telescopes, and also draw attention of many optical fabricators. Because the active support system can correct the low order figure errors, such as astigmatism, coma, trefoil 3rd astigmatism, the optical fabricators can just focus on to remove high order figure errors. This will shorten the fabrication time. In this paper, we present an active support system for a 1.2m meniscus parabolic primary mirror. It contains 37 axial push-pull force supports, 3 axial fixed points, and 4 lateral restraints. Some basic performance of the active support system is analyzed and the figure error correction capability is also studied based on Zernike modes. © 2015 SPIE. |
| 英文摘要 | Thin meniscus primary mirrors with active support have been used successfully in many large telescopes, and also draw attention of many optical fabricators. Because the active support system can correct the low order figure errors, such as astigmatism, coma, trefoil 3rd astigmatism, the optical fabricators can just focus on to remove high order figure errors. This will shorten the fabrication time. In this paper, we present an active support system for a 1.2m meniscus parabolic primary mirror. It contains 37 axial push-pull force supports, 3 axial fixed points, and 4 lateral restraints. Some basic performance of the active support system is analyzed and the figure error correction capability is also studied based on Zernike modes. © 2015 SPIE. |
| 收录类别 | SCI ; EI |
| 学科主题 | Error correction - Errors - Mirrors |
| 语种 | 英语 |
| ISSN号 | 0277-786X |
| 源URL | [http://ir.ioe.ac.cn/handle/181551/7626]  |
| 专题 | 光电技术研究所_先光中心 |
| 作者单位 | Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu, China |
| 推荐引用方式 GB/T 7714 | Liu, Haitao,Fan, Bin,Zeng, Zhige,et al. Design and simulation of the active support system for a 1.2m meniscus primary mirror[C]. 见:Proceedings of SPIE - The International Society for Optical Engineering. 2015. |
入库方式： OAI收割
来源：光电技术研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。