Defect study on several fluoride coatings
文献类型：会议论文
| 作者 | Zhang Yaoping; Zhang Yundong |
| 出版日期 | 2009 |
| 会议名称 | Proceedings of SPIE |
| 会议日期 | 2009 |
| 卷号 | 7283 |
| 通讯作者 | Zhang Yaoping |
| 中文摘要 | Defect in thin film is one of the most important factors influencing laser-induced damage in infrared laser systems, and always a major concern. The infrared thin film is required for reflecting infrared and visible wavelengths, and the materials should be low-absorbing in the spectral wavelengths as well. In general, this multilayer coating consists of a number of high and low reflective index materials with alternate layers. Zinc Sulfide is used as high index material because it has good visible and IR optical properties. Low index material can be Thorium Fluoride, but ThF4 is radioactive and toxic, several fluoride coatings are studied in order to select an appropriate material instead of ThF4 in this paper. Single layer of YbF3, LaF3,YBC(a new combined fluoride) and PrF2 coating are produced by thermal evaporation, and classifications and derivation of defects in these thin films are introduced firstly. Then, the influence of depositing method on surface defect density of laser thin film is analyzed. Finally, result shows that YbF3 is an appropriate fluoride in place of ThF4, and the multilayer thin film deposited by YbF3 and ZnS material can be applied in infrared laser systems. |
| 英文摘要 | Defect in thin film is one of the most important factors influencing laser-induced damage in infrared laser systems, and always a major concern. The infrared thin film is required for reflecting infrared and visible wavelengths, and the materials should be low-absorbing in the spectral wavelengths as well. In general, this multilayer coating consists of a number of high and low reflective index materials with alternate layers. Zinc Sulfide is used as high index material because it has good visible and IR optical properties. Low index material can be Thorium Fluoride, but ThF4 is radioactive and toxic, several fluoride coatings are studied in order to select an appropriate material instead of ThF4 in this paper. Single layer of YbF3, LaF3,YBC(a new combined fluoride) and PrF2 coating are produced by thermal evaporation, and classifications and derivation of defects in these thin films are introduced firstly. Then, the influence of depositing method on surface defect density of laser thin film is analyzed. Finally, result shows that YbF3 is an appropriate fluoride in place of ThF4, and the multilayer thin film deposited by YbF3 and ZnS material can be applied in infrared laser systems. |
| 收录类别 | EI |
| 语种 | 英语 |
| 源URL | [http://ir.ioe.ac.cn/handle/181551/7733]  |
| 专题 | 光电技术研究所_自适应光学技术研究室（八室） |
| 作者单位 | 中国科学院光电技术研究所 |
| 推荐引用方式 GB/T 7714 | Zhang Yaoping,Zhang Yundong. Defect study on several fluoride coatings[C]. 见:Proceedings of SPIE. 2009. |
入库方式： OAI收割
来源：光电技术研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。