RGBD sensor-based Path Generation Method for arc welding robot
文献类型：会议论文
| 作者 | Li J(李婧) ; Jing Fengshui
|
| 出版日期 | 2016 |
| 会议名称 | the 28th Chinese Control and Decision Conference |
| 会议日期 | 2016-5 |
| 会议地点 | 中国，银川 |
| 关键词 | point cloud image processing arc welding path generation |
| 通讯作者 | Jing Fengshui |
| 英文摘要 | In this paper, an auto path generation method for arc welding robot is proposed by using a RGB-D sensor. From the generated 3D point cloud of the weld workpiece, the welding line is extracted and the path points of the robot are generated by an auto path generation algorithm. So the torch tip of the arc welding robot would walks along the welding line. This path generation module is added to current widely used ordinary arc welding robot while not changing it, used to assist people when teaching arc welding robots. This maybe eventually replace operator by automatically generate the path. The detail algorithm of the recognizing space curve welding lines and the auto path point generation method are emphasized in this paper. Experimental result shows the application feasibility of the proposed method. |
| 收录类别 | EI |
| 会议录 | the 28th Chinese Control and Decision Conference
 |
| 源URL | [http://ir.ia.ac.cn/handle/173211/11770]  |
| 专题 | 自动化研究所_复杂系统管理与控制国家重点实验室_先进机器人控制团队 |
| 通讯作者 | Jing Fengshui |
| 作者单位 | 中国科学院自动化研究所 |
| 推荐引用方式 GB/T 7714 | Li J,Jing Fengshui. RGBD sensor-based Path Generation Method for arc welding robot[C]. 见:the 28th Chinese Control and Decision Conference. 中国，银川. 2016-5. |
入库方式： OAI收割
来源：自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。