石料力学性能分析在旧石器考古学研究中的应用
文献类型：期刊论文
| 作者 | 周振宇; 郇勇 ; 刘薇; 董杰
|
| 刊名 | 人类学学报
 |
| 出版日期 | 2016 |
| 卷号 | 35期号:3页码:407-417 |
| 通讯作者邮箱 | zzy529@msn.com |
| 关键词 | Paleolithic Rock Mechanics Mechanic properties Raw material utilization |
| ISSN号 | 1000-3193 |
| 其他题名 | The application of lithic raw material mechanical analysis in Paleolithic archaeology |
| 产权排序 | 周振宇, 中国社会科学院考古研究所, 中国科学院脊椎动物演化与人类起源重点实验室, 北京 100071, 中国.; 郇勇, 中国科学院力学研究所, 非线性力学国家重点实验室, 北京 100190, 中国.; 刘薇, 中国科学院力学研究所, 非线性力学国家重点实验室, 北京 100190, 中国.; 董杰, 中国科学院力学研究所, 非线性力学国家重点实验室, 北京 100190, 中国. |
| 中文摘要 | 石料是石器制作过程中的重要因素,石料本身的力学性能不仅与古人类的原料利用方式密切相关,还会影响到石器打制方法、器物组合、甚至石器工业面貌。长期以来,旧石器考古学界对于石料力学性能的判断多基于简单的岩石矿物硬度和结构特征,实际上岩石的力学性能涵盖的内容远远超过其硬度和结构的范畴。本文使用力学研究的方法,通过对石料的单轴抗压强度测试,了解不同原料的力学性能,并将其与遗址出土石制品进行比较研究,尝试探讨岩石本身力学性能与石制品面貌之间的关系。 |
| 英文摘要 | Raw material is commonly considered as a very important element in prehistoric stone tools production. Different raw material has been proved to cause variability in lithic assemblages by influencing the knapping technique and tool types. The knapping properties of raw material have a strong correlation with rock mechanical properties which are determined by factors such as mineral composition, crystal size, density, texture, and degree of weathering, moisture content, etc. For a long time, hardness is taken as only criteria to evaluate the raw material mechanical properties based on a semi-quantitative lithic grade scale. In most cases, "easy", "good", are used to describe the high quality raw material by knappers' subjective sensation. Lithology analysis and mechanical tests have been proved as quantitative approach for mechanical properties of stone raw material. In the past study, four mechanical properties, elastic response, compressive strength, tensile strength, and fracture toughness were selected for testing. Fracture toughness was supposed as the most objective measure of the knapping quality of raw materials. In this paper, the results of lithology mechanical tests have shown that compressive strength is also an objective measure of the raw material quality. Besides that, rock damage processes in compression tests include the initiation, development and nucleation of cracks that can be refl ected on strain vs. stress curves. To investigate the mechanical properties of raw material, compression tests were performed using a MTS 810 material testing machine. Specimen cubes were cut out of pebbles from Paleolithic site for the tests. Force is measured by the load cell, and the deformation of the specimen is measured by a COD displacement sensor fi xed between two compression plates. This deformation vs. force relationship was then transformed to a strain vs. stress curve. Six kinds of raw material, dolomite, chert, obsidian, quartz, quartzite, and granite, were involved in the compression test. In Shuidonggou site, dolomite shows higher ductility and brittleness than quartz and quartzite. This result implies that dolomite appears better fl aking properties than quartz and quartzite in Shuidonggou. Archaeology remains The quartz from Beitaishanmiao site, Hubei and Xujiacheng site, Gansu present the similar lithology mechanical properties, which might be taken as one explanation for that both two sites shows similar raw material utilization and lithic assemblage. In the chert (Daerwo site, Guanyindong site, Guizhou) and obsidian (Japan) specimens we examined, since of the microfi ssure, both the dispersion of maximum stress and maximum strain is bigger than dolomite, quartz, sand quartzite, and granite. This suggests that, in some case, the macro-crystal rock maybe appears better fl aking properties than microcrystal rock, such as chert, fl int, and obsidian. In this study, mechanical properties analysis has been proved quite objective method for raw material utilization analysis. We suggest that knapping experiment should be correlated with mechanical tests. Moreover, more mechanical tests with different raw materials from different sites are necessary for the comparative examination and also significant for building a raw material mechanical properties database. |
| 关键词[WOS] | Paleolithic ; Rock Mechanics ; Mechanic properties ; Raw material utilization |
| 收录类别 | CSCD |
| 语种 | 中文 |
| CSCD记录号 | CSCD:5773628 |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/59795]  |
| 专题 | 力学研究所_非线性力学国家重点实验室 |
| 推荐引用方式 GB/T 7714 | 周振宇,郇勇,刘薇,等. 石料力学性能分析在旧石器考古学研究中的应用[J]. 人类学学报,2016,35(3):407-417. |
| APA | 周振宇,郇勇,刘薇,&董杰.(2016).石料力学性能分析在旧石器考古学研究中的应用.人类学学报,35(3),407-417. |
| MLA | 周振宇,et al."石料力学性能分析在旧石器考古学研究中的应用".人类学学报 35.3(2016):407-417. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。