中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
激光钕玻璃包边残余应力实验研究

文献类型:期刊论文

作者胡俊江; 孟涛; 温磊; 陈尤阔; 陈辉宇; 程继萌; 唐景平; 王标; 陈树彬; 陈伟
刊名中国激光
出版日期2015
卷号42期号:2页码:206001
其他题名Experiment Investigation on Residual Stress of Nd:Glass Edge Cladding
通讯作者Hu Junjiang, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. ; Men Tao, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. ; Wen Lei, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. ; Chen Youkuo, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. ; Chen Huiyu, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. ; Chen JiMeng, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. ; Tang Jingping, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. ; Wang Biao, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. ; Chen Shubin, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. ; Chen Wei, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. ; Hu Lili, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China.
中文摘要为减少放大自发辐射和抑制寄生震荡,需在激光钕玻璃片侧面粘接一层吸收介质包边玻璃,其中,包边残余应力是粘接的一个重要参数。详细描述了激光钕玻璃与包边玻璃在包边粘接过程中粘接界面附近残余应力的来源,实验讨论分析了精密退火、加工、包边粘接等对界面附近残余应力的影响。结果表明,退火过程中的边缘应力对粘接界面附近残余应力影响比较大,且包边面加工面型匹配越差,则界面附近残余应力越大,而低收缩率和低模量的粘接胶对界面附近的残余应力影响较小。
英文摘要In order to decrease the reflectivity of amplified spontaneous emission, suppress parasitic oscillations, an edge cladding that absorbs the reflected or scattered light is required. The residual stress of the edge cladding is an important parameter for bonding. The influence factors on the residual stress birefringence near the bonding interface are described in detail. The effects of fine annealing, polishing and bonding are investigated. The results indicate that the effects of the edge stress of samples on the residual stress near the bonded interface are in evidence; the poorer of polishing surface flatness makes, the larger birefringence near the cladding interface; and the low shrink percentage and modulus adhesive polymer have less impact for the residual stress near the interface.
收录类别EI
原文出处http://www.opticsjournal.net
语种中文
版本出版稿
源URL[http://ir.siom.ac.cn/handle/181231/13852]  
专题上海光学精密机械研究所_高功率激光单元技术研发中心
作者单位1.胡俊江, 中国科学院上海光学精密机械研究所, 上海 201800, 中国.
2.孟涛, 中国科学院上海光学精密机械研究所, 上海 201800, 中国.
3.温磊, 中国科学院上海光学精密机械研究所, 上海 201800, 中国.
4.陈尤阔, 中国科学院上海光学精密机械研究所, 上海 201800, 中国.
5.陈辉宇, 中国科学院上海光学精密机械研究所, 上海 201800, 中国.
6.程继萌, 中国科学院上海光学精密机械研究所, 上海 201800, 中国.
7.唐景平, 中国科学院上海光学精密机械研究所, 上海 201800, 中国.
8.王标, 中国科学院上海光学精密机械研究所, 上海 201800, 中国.
9.陈树彬, 中国科学院上海光学精密机械研究所, 上海 201800, 中国.
10.陈伟, 中国科学院上海光学精密机械研究所, 上海 201800, 中国.
推荐引用方式
GB/T 7714
胡俊江,孟涛,温磊,等. 激光钕玻璃包边残余应力实验研究[J]. 中国激光,2015,42(2):206001.
APA 胡俊江.,孟涛.,温磊.,陈尤阔.,陈辉宇.,...&胡丽丽.(2015).激光钕玻璃包边残余应力实验研究.中国激光,42(2),206001.
MLA 胡俊江,et al."激光钕玻璃包边残余应力实验研究".中国激光 42.2(2015):206001.

入库方式: OAI收割

来源:上海光学精密机械研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。