利用预曝光技术制备复合结构光纤光栅传感器
文献类型：期刊论文
| 作者 | 周赢武; 高侃; 黄锐; 瞿荣辉; 方祖捷 |
| 刊名 | 半导体光电
 |
| 出版日期 | 2003 |
| 卷号 | 24期号:6页码:396 |
| 其他题名 | Study on Composite FBG Sensor Prepared by Pre-exposure Technology |
| 中文摘要 | 报道利用预曝光技术制备的复合结构光纤光栅传感器。提出利用预曝光技术使某一小段光纤的折射率变大，而后在预曝光部分和未曝光部分的交接处一次性写入光栅，即可得到具有两个透射峰的透射谱。实验研究了该复合结构光纤光栅在温度和应力传感上的应用。实验结果表明，利用该复合结构光纤光栅可以实现温度与应变的同时测量。 |
| 英文摘要 | A composite fiber Bragg grating based on pre-exposure technology is described in this paper. The FBG was imprinted on the joint part of the pre-exposure section and un-pre-exposure section of the fiber. Due to the difference of the index between the two sections, the FBG has two reflection peaks at different wavelengths. The composite FBG is investigated experimentally for sensor applications. The experimental results show that the FBG can be used to measure temperature and strain simultaneously. |
| 收录类别 | CSCD |
| 语种 | 中文 |
| CSCD记录号 | CSCD:1176463 |
| 版本 | 出版稿 |
| 源URL | [http://ir.siom.ac.cn/handle/181231/18172]  |
| 专题 | 上海光学精密机械研究所_信息光学开放实验室 |
| 作者单位 | 1.Zhou Yingwu, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. 2.Gao Kan, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. 3.Huang Rui, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. 4.Qu Ronghui, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. 5.Fang Zujie, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800, China. |
| 推荐引用方式 GB/T 7714 | 周赢武,高侃,黄锐,等. 利用预曝光技术制备复合结构光纤光栅传感器[J]. 半导体光电,2003,24(6):396. |
| APA | 周赢武,高侃,黄锐,瞿荣辉,&方祖捷.(2003).利用预曝光技术制备复合结构光纤光栅传感器.半导体光电,24(6),396. |
| MLA | 周赢武,et al."利用预曝光技术制备复合结构光纤光栅传感器".半导体光电 24.6(2003):396. |
入库方式： OAI收割
来源：上海光学精密机械研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。