中国科学院机构知识库网格
Chinese Academy of Sciences Institutional Repositories Grid
Measurement of thermal distortion in high power laser glass elements using ptychography

文献类型:期刊论文

作者Wang, H.; Veetil, Suhas P.; Liu, C.; Wang, J.; Huang, W.; Zhang, Y.; Pan, X.; Zhu, J.
刊名laser phys. lett.
出版日期2015
卷号12期号:2页码:25005
通讯作者wang, h (reprint author), chinese acad sci, shanghai inst opt & fine mech, shanghai 201800, peoples r china.
英文摘要the heat generated in the cavity of the high power slab laser amplifier makes it less stable and induces a thermal-lens effect which adds a spherical phase distribution to the wave-front of the laser beam. the commonly employed interferometry or hartmann-shack sensor based measurements are unable to provide an accurate measurement of the thermal distortion of the gain medium. it is demonstrated that this problem can be solved using a scheme based on ptychographical iterative engine. the complex transmittance of the outgoing laser is obtained by the proposed scheme while the amplifier is set at its turned off and turned on state and the thermal distortion caused by the pumping light is calculated from the obtained transmittance.
收录类别SCI
语种英语
版本出版稿
源URL[http://ir.siom.ac.cn/handle/181231/14256]  
专题上海光学精密机械研究所_中科院强激光材料重点实验室
作者单位1.[Wang, H.
2.Liu, C.
3.Wang, J.
4.Huang, W.
5.Zhang, Y.
6.Pan, X.
7.Zhu, J.] Chinese Acad Sci, Shanghai Inst Opt & Fine Mech, Shanghai 201800, Peoples R China
8.[Veetil, Suhas P.] Higher Coll Technol, Dept Engn Technol & Sci, Fujairah 1626, U Arab Emirates
推荐引用方式
GB/T 7714
Wang, H.,Veetil, Suhas P.,Liu, C.,et al. Measurement of thermal distortion in high power laser glass elements using ptychography[J]. laser phys. lett.,2015,12(2):25005.
APA Wang, H..,Veetil, Suhas P..,Liu, C..,Wang, J..,Huang, W..,...&Zhu, J..(2015).Measurement of thermal distortion in high power laser glass elements using ptychography.laser phys. lett.,12(2),25005.
MLA Wang, H.,et al."Measurement of thermal distortion in high power laser glass elements using ptychography".laser phys. lett. 12.2(2015):25005.

入库方式: OAI收割

来源:上海光学精密机械研究所

浏览0
下载0
收藏0
其他版本

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。