A novel and practical strategy for the precise chamferless robotic peg hole insertion
文献类型：期刊论文
| 作者 | H. Qiao ; B. S. Dalay; R. M. Parkin; H Qiao
|
| 刊名 | Robotica
 |
| 出版日期 | 1995-01 |
| 卷号 | 13期号:1页码:29-35 |
| 关键词 | ROBOTICS / FORCE SENSOR / DEVIATION / ANGULAR ERROR / ASSEMBLY |
| 通讯作者 | H Qiao |
| 英文摘要 | The influence of the angle between the axes of the peg and hole (angular error) and the contact surface defects on the measurement of deviation (lateral error) have been carefully analysed. It has been shown that they would influence the measurement of the magnitude of deviation and even its direction. This phenomenon causes severe difficulty in the assembly operations. A novel strategy for the high-precision chamferless peg hold insertion with a wrist force sensor is presented. This strategy is constructed: (1) to obtain the relationship between the peg and hole from the force sensor signal when an angle between the axes of the peg and hole exists and defects of the contact surfaces are present, (2) to reduce the angular and lateral errors, (3) to achieve the precise chamferless robotic peg hole insertion. In this paper, the insertion can be obtained with a reasonably large range of initial conditions. The principle is to move and rotate the peg from an area having many geometric uncertainties to a new area, where the deviation of the peg and hole can be obtained. |
| 源URL | [http://ir.ia.ac.cn/handle/173211/12605]  |
| 专题 | 自动化研究所_09年以前成果 |
| 通讯作者 | H Qiao |
| 作者单位 | Dept. of Mechanical and Manufacturing Engineering, De Montfort University |
| 推荐引用方式 GB/T 7714 | H. Qiao,B. S. Dalay,R. M. Parkin,et al. A novel and practical strategy for the precise chamferless robotic peg hole insertion[J]. Robotica,1995,13(1):29-35. |
| APA | H. Qiao,B. S. Dalay,R. M. Parkin,&H Qiao.(1995).A novel and practical strategy for the precise chamferless robotic peg hole insertion.Robotica,13(1),29-35. |
| MLA | H. Qiao,et al."A novel and practical strategy for the precise chamferless robotic peg hole insertion".Robotica 13.1(1995):29-35. |
入库方式： OAI收割
来源：自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。