Precise Robotic Chamferless Peg-Hole Insertion Operation Without Force Feedback and Remote Centre Compliance (RCC)
文献类型：期刊论文
| 作者 | QIAO, H ; DALAY, BS; PARKIN, RM
|
| 刊名 | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
 |
| 出版日期 | 1994 |
| 卷号 | 208期号:2页码:89-104 |
| 关键词 | empty |
| 通讯作者 | QIAO, H |
| 英文摘要 | Robots can be widely used in the industrial assembly operation if the task can be performed with high precision, high speed and with low cost. Peg-hole insertion is a fundamental operation whose problems have been the focus of much work. In the passive accommodation solution, remote centre compliance (RCC) is used to perform chamfered peg-hole insertion. The principle exploited involves using RCC as a mechanical map which transfers the translational and angular errors, between the peg and the hole, into corrective motion. The potential advantages of minimized cycle times are offset by the limited precision. This contrasts with techniques exploiting active accommodation which use a force sensor to arrive at the deviation, between the peg and hole axes, to achieve chamferless insertion. A strategy is developed here that uses neither of these additional accessories but instead exploits features of both techniques with defined initial conditions. The immediate advantages of reduced hardware complexity are supplemented by evidence of trials. These were based on a 31.99 mm diameter peg and a hole with a diameter clearance of 0.02 mm. The results showed that the algorithm operated reliably with small clearances and with minimum cycle times. This confirms its potentially wide application in industry where its simplicity can be fully exploited. |
| 学科主题 | Engineering, Mechanical |
| 源URL | [http://ir.ia.ac.cn/handle/173211/12606]  |
| 专题 | 自动化研究所_09年以前成果 |
| 作者单位 | Department of Mechanical and Manufacturing Engineering, De Montfort University |
| 推荐引用方式 GB/T 7714 | QIAO, H,DALAY, BS,PARKIN, RM. Precise Robotic Chamferless Peg-Hole Insertion Operation Without Force Feedback and Remote Centre Compliance (RCC)[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,1994,208(2):89-104. |
| APA | QIAO, H,DALAY, BS,&PARKIN, RM.(1994).Precise Robotic Chamferless Peg-Hole Insertion Operation Without Force Feedback and Remote Centre Compliance (RCC).PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,208(2),89-104. |
| MLA | QIAO, H,et al."Precise Robotic Chamferless Peg-Hole Insertion Operation Without Force Feedback and Remote Centre Compliance (RCC)".PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE 208.2(1994):89-104. |
入库方式： OAI收割
来源：自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。