Robotic Peg-Hole Insertion Operations using a Six-Component Force Sensor
文献类型：期刊论文
| 作者 | QIAO, H ; DALAY, BS; PARKIN, RM
|
| 刊名 | PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
 |
| 出版日期 | 1993 |
| 卷号 | 207期号:5页码:289-306 |
| 关键词 | empty |
| 通讯作者 | QIAO, H |
| 英文摘要 | Peg-hole insertion is a widely used industrial robot process. For precise insertion it is common to use force sensors to obtain the deviation between the peg and the hole. In this paper, several examples of six-component force sensors, which are designed to measure the forces and torques in all directions, are reviewed. The problem of how to obtain the deviation between the peg and the hole from the measurement of the forces and the torques exerted on the sensors is then discussed. It is shown that the angle between the peg and the hole and the roughness of the contact surfaces (the end surface of the peg and the surface surrounding the hole) would significantly influence the identification of deviation, no matter how small they are. Two measures to address these phenomena are introduced. A novel strategy of the high-precision chamferless peg-hole insertion with a wrist force sensor is presented and verified experimentally. This strategy is constructed: (a) to obtain the relationship between the peg and hole from the force sensor signal when angular misalignment and the defects of the contact surfaces are present, (b) to reduce the angular and lateral errors and (c) to achieve precise chamferless robotic peg-hole insertion. In this paper, it is shown that the insertion can be effected with a reasonably large range of initial conditions. The principle is to move and rotate the peg from an area having many geometric uncertainties to a new area, where the deviation of the peg and hole can be obtained. |
| 学科主题 | Engineering, Mechanical |
| 源URL | [http://ir.ia.ac.cn/handle/173211/12607]  |
| 专题 | 自动化研究所_09年以前成果 |
| 作者单位 | Department of Mechanical and Manufacturing Engineering, De Montfort University |
| 推荐引用方式 GB/T 7714 | QIAO, H,DALAY, BS,PARKIN, RM. Robotic Peg-Hole Insertion Operations using a Six-Component Force Sensor[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,1993,207(5):289-306. |
| APA | QIAO, H,DALAY, BS,&PARKIN, RM.(1993).Robotic Peg-Hole Insertion Operations using a Six-Component Force Sensor.PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,207(5),289-306. |
| MLA | QIAO, H,et al."Robotic Peg-Hole Insertion Operations using a Six-Component Force Sensor".PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE 207.5(1993):289-306. |
入库方式： OAI收割
来源：自动化研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。