Pressureless sintering of titanium carbide doped with boron or boron carbide
文献类型：期刊论文
| 作者 | Gu, Yifeng1,2; Liu, Ji-Xuan3; Xu, Fangfang1; Zhang, Guo-Jun3 |
| 刊名 | JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
 |
| 出版日期 | 2017-02-01 |
| 卷号 | 37期号:2页码:539-547 |
| 关键词 | Titanium carbide Pressureless sintering Microstructures Mechanical properties |
| 英文摘要 | Titanium carbide ceramics with different contents of boron or B4C were pressureless sintered at temperatures from 2100 degrees C to 2300 degrees C. Due to the removal of oxide impurities, the onset temperature for TiC grain growth was lowered to 2100 degrees C and near fully dense (>98%) TiC ceramics were obtained at 2200 degrees C. TiB2 platelets and graphite flakes were formed during sintering process. They retard TiC grains from fast growth and reduced the entrapped pores in TiC grains. Therefore, TiC doped with boron or B4C could achieve higher relative density (>99.5%) than pure TiC (96.67%) at 2300 degrees C. Mechanical properties including Vickers' hardness, fracture toughness and flexural strength were investigated. Highest fracture toughness (4.79 +/- 0.50 MPa m(1/2)) and flexural strength (552.6 +/- 23.1 MPa) have been obtained when TiC mixed with B4C by the mass ratio of 100:5.11. The main toughening mechanisms include crack deflection and pull-out of TiB2 platelets. (C) 2016 Elsevier Ltd. All rights reserved. |
| WOS标题词 | Science & Technology ; Technology |
| 类目[WOS] | Materials Science, Ceramics |
| 研究领域[WOS] | Materials Science |
| 关键词[WOS] | MECHANICAL-PROPERTIES ; BOROTHERMAL REDUCTION ; TIB2-TIC COMPOSITES ; ZIRCONIUM DIBORIDE ; POWDERS SYNTHESIS ; TANTALUM CARBIDE ; SILICON-CARBIDE ; TIC COMPOSITES ; CARBON ; CERAMICS |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000386643900013 |
| 源URL | [http://ir.sic.ac.cn/handle/331005/21994]  |
| 专题 | 上海硅酸盐研究所_无机材料分析测试中心_期刊论文 |
| 作者单位 | 1.Shanghai Inst Ceram, State Key Lab High Performance Ceram & Superfine, Shanghai 200050, Peoples R China 2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China 3.Donghua Univ, Res Inst Funct Mat, State Key Lab Modificat Chem Fibers & Polymer Mat, Shanghai 201620, Peoples R China |
| 推荐引用方式 GB/T 7714 | Gu, Yifeng,Liu, Ji-Xuan,Xu, Fangfang,et al. Pressureless sintering of titanium carbide doped with boron or boron carbide[J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY,2017,37(2):539-547. |
| APA | Gu, Yifeng,Liu, Ji-Xuan,Xu, Fangfang,&Zhang, Guo-Jun.(2017).Pressureless sintering of titanium carbide doped with boron or boron carbide.JOURNAL OF THE EUROPEAN CERAMIC SOCIETY,37(2),539-547. |
| MLA | Gu, Yifeng,et al."Pressureless sintering of titanium carbide doped with boron or boron carbide".JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 37.2(2017):539-547. |
入库方式： OAI收割
来源：上海硅酸盐研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。