A design methodology for RFID SAW tag
文献类型：会议论文
| 作者 | Dasong Peng; Ting Yu; Fengqi Yu |
| 出版日期 | 2009 |
| 会议名称 | 2009 Second ISECS International Colloquium on Computing, Communication, Control, and Management, CCCM 2009 |
| 会议地点 | Changsha |
| 英文摘要 | Radio frequency identification (RFID) system based on surface acoustic wave (SAW) tag has great potential for future applications. It is importantfor a tag to have uniform amplitude of output signal which easily for tag discrimination and data processing. In this paper, we propose amethodology for SAW tag design based on ANSYS piezoelectric analysis simulation model. Using the methodology, two tags are simulated,designed, and fabricated. One has fixed number of electrodes in each reflector and varied electrode width. The other has varied both number and width of the electrodes in each reflector. A comparison is made between simulation and test results. |
| 收录类别 | EI |
| 语种 | 英语 |
| 源URL | [http://ir.siat.ac.cn:8080/handle/172644/2397]  |
| 专题 | 深圳先进技术研究院_集成所 |
| 作者单位 | 2009 |
| 推荐引用方式 GB/T 7714 | Dasong Peng,Ting Yu,Fengqi Yu. A design methodology for RFID SAW tag[C]. 见:2009 Second ISECS International Colloquium on Computing, Communication, Control, and Management, CCCM 2009. Changsha. |
入库方式： OAI收割
来源：深圳先进技术研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。