Miniaturized printed wire antenna in package for 2.4GHz wireless communications
文献类型：会议论文
| 作者 | Xiaoli Liu; Yunfeng Wang; Lei Li; Lixi Wan |
| 出版日期 | 2009 |
| 会议名称 | 2009 International Conference on ElectronicPackaging Technology and High Density Packaging, ICEPT-HDP 2009 |
| 英文摘要 | Miniaturized printed wire antennas in system in package were investigated for 2.4 GHz wireless communication systems. An inverted F antennawas proposed, and had a small area with 15mm by 15mm. The position of feed tap connected to the antenna arm greatly influenced the impedance of antenna, namely, it could adjust the position of feed tap to match the impedance to 50 ohm. The influences of chips and epoxy molding compounds on the impedance were also studied. Eventually, the inverted F antenna in package had a bandwidth and gain with almost 200MHz and 2.8dB, respectively, and could meet the demands of 2.4GHz wireless communication. |
| 收录类别 | EI |
| 语种 | 英语 |
| 源URL | [http://ir.siat.ac.cn:8080/handle/172644/2512]  |
| 专题 | 深圳先进技术研究院_集成所 |
| 作者单位 | 2009 |
| 推荐引用方式 GB/T 7714 | Xiaoli Liu,Yunfeng Wang,Lei Li,et al. Miniaturized printed wire antenna in package for 2.4GHz wireless communications[C]. 见:2009 International Conference on ElectronicPackaging Technology and High Density Packaging, ICEPT-HDP 2009. |
入库方式： OAI收割
来源：深圳先进技术研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。