Design and optimization of honeycomb corrugated chaff forming roller
文献类型：会议论文
| 作者 | Yang Xiaoping; Zhong Bo; Luo Changjie |
| 出版日期 | 2014 |
| 会议名称 | 3rd International Conference on Advanced Materials Design and Mechanics, ICAMDM 2014 |
| 会议地点 | Singapore |
| 英文摘要 | Abstract. By analyzing the material properties and forming characteristics of the 0.8mm length side hexagon honeycomb corrugated chaff , we studied forming roller’s design and optimization while making corrugated chaffs used forming method and focus on the influence of the chamfer of teeth top edge and number of teeth to forming quality at the corrugated chaff corner .We used finite element analysis software ANSYS / LS-DYNA to simulate the forming process of corrugated chaff , studied the stress contour and stress-time curve of typical element, found the optimal chamfer of teeth top edge and number of teeth, then we used the designed forming roller to verify the effect of chaff forming . By comparison experimental and simulation results,we found good agreement between the two, when the chamfer of teeth top edge dj = 0.08mm, number of teeth z = 40, the chaff has the best forming quality . |
| 收录类别 | EI |
| 语种 | 英语 |
| 源URL | [http://ir.siat.ac.cn:8080/handle/172644/5538]  |
| 专题 | 深圳先进技术研究院_集成所 |
| 作者单位 | 2014 |
| 推荐引用方式 GB/T 7714 | Yang Xiaoping,Zhong Bo,Luo Changjie. Design and optimization of honeycomb corrugated chaff forming roller[C]. 见:3rd International Conference on Advanced Materials Design and Mechanics, ICAMDM 2014. Singapore. |
入库方式： OAI收割
来源：深圳先进技术研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。