Tool path generation for pattern sculpting on free-form surfaces
文献类型：期刊论文
| 作者 | Jinting Xu; Xiangkui Zhang; Shunke Wang; Jianhuang Wu |
| 刊名 | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
 |
| 出版日期 | 2013 |
| 英文摘要 | Sculpting pattern onto free-form surfaces is a potential method for many applications such as jewelry, glass blowmolding, injection molding, even automatically spray painting on the surfaces, etc. In this paper, a method of tool path generation for pattern sculpting on free-form surfaces is developed. First, 2D pattern is converted into discrete data points for tool path generation from digital image using image processing technique. To map the discrete pattern onto the part surface, mesh mapping is introduced, which is used for flattening the part surfaces onto a plane. On this plane, the discrete pattern is scaled, rotated, and translated to a desirable location. Then using the mapping of the part surface to the plane as a guide, the pattern to be sculpted is inversely mapped back onto the part surface. On this basis, according to the selected cutter and the depth of cut, the tool path is generated. Since the method does not rely on processing on the surface parametric domain, it is not limited to single surface patch, and is also equally applicable to multiple trimmed surfaces and mesh surfaces, etc. During calculation of the projected pattern, the proposed method does not involve any iterative numerical procedures, thus it is also robust and efficient. Finally, the method is implemented and tested on several typical examples to verify its validity. |
| 收录类别 | SCI |
| 原文出处 | http://download.springer.com/static/pdf/163/art%253A10.1007%252Fs00170-012-4664-4.pdf?originUrl=http%3A%2F%2Flink.springer.com%2Farticle%2F10.1007%2Fs00170-012-4664-4&token2=exp=1433174129~acl=%2Fstatic%2Fpdf%2F163%2Fart%25253A10.1007%25252Fs00170-012-4664-4.pdf%3ForiginUrl%3Dhttp%253A%252F%252Flink.springer.com%252Farticle%252F10.1007%252Fs00170-012-4664-4*~hmac=84c7fc12d30295c49b1cddfe79769a7249ff97409e6e560347af084798552e65 |
| 语种 | 英语 |
| 源URL | [http://ir.siat.ac.cn:8080/handle/172644/4855]  |
| 专题 | 深圳先进技术研究院_医工所 |
| 作者单位 | INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
| 推荐引用方式 GB/T 7714 | Jinting Xu,Xiangkui Zhang,Shunke Wang,et al. Tool path generation for pattern sculpting on free-form surfaces[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2013. |
| APA | Jinting Xu,Xiangkui Zhang,Shunke Wang,&Jianhuang Wu.(2013).Tool path generation for pattern sculpting on free-form surfaces.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. |
| MLA | Jinting Xu,et al."Tool path generation for pattern sculpting on free-form surfaces".INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013). |
入库方式： OAI收割
来源：深圳先进技术研究院
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。