3D-Printing of inverted pyramid suspending architecture for pyroelectric infrared detectors with inhibited microphonic effect
文献类型：期刊论文
| 作者 | Xu, Qing1,2; Zhao, Xiangyong1; Li, Xiaobing1; Deng, Hao1; Yan, Hong1; Yang, Linrong1,2; Di, Wenning1; Luo, Haosu1; Neumann, Norbert3 |
| 刊名 | INFRARED PHYSICS & TECHNOLOGY
 |
| 出版日期 | 2016-05-01 |
| 卷号 | 76页码:111-115 |
| 关键词 | 3D-Printing Suspending architecture Pyroelectric devices Microphonic effect Figure of merit |
| 英文摘要 | A sensitive chip with ultralow dielectric loss based on Mn doped PMNT (71/29) has been proposed for high-end pyroelectric devices. The dielectric loss at 1 kHz is 0.005%, one order lower than the minimum value reported so far. The detective figure of merit (Fa) is up to 92.6 x 10(-5) Pa-1/2 at 1 kHz and 53.5 x 10(-5) Pa-1/2 at 10 Hz, respectively. In addition, an inverted pyramid suspending architecture for supporting the sensitive chip has been designed and manufactured by 3D printing technology. The combination of this sensitive chip and the proposed suspending architecture largely enhances the performance of the pyroelectric detectors. The responsivity and specific detectivity are 669,811 V/W and 3.32 x 10(9) cm Hz(1/2)/W at 10 Hz, respectively, 1.9 times and 1.5 times higher than those of the highest values in literature. Furthermore, the microphonic effect can be largely inhibited according to the theoretical and experimental analysis. This architecture will have promising applications in high-end and stable pyroelectric infrared detectors. (C) 2016 Elsevier B.V. All rights reserved. |
| WOS标题词 | Science & Technology ; Technology ; Physical Sciences |
| 类目[WOS] | Instruments & Instrumentation ; Optics ; Physics, Applied |
| 研究领域[WOS] | Instruments & Instrumentation ; Optics ; Physics |
| 关键词[WOS] | SINGLE-CRYSTALS ; NANOWIRES ; NANOGENERATOR ; MECHANISMS |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000377725100013 |
| 源URL | [http://ir.sic.ac.cn/handle/331005/22968]  |
| 专题 | 上海硅酸盐研究所_无机功能材料与器件重点实验室_期刊论文 |
| 作者单位 | 1.Chinese Acad Sci, Shanghai Inst Ceram, Key Lab Inorgan Funct Mat & Device, Shanghai 201800, Peoples R China 2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China 3.InfraTec GmbH Infrarotmesstech & Sensor, D-01217 Dresden, Germany |
| 推荐引用方式 GB/T 7714 | Xu, Qing,Zhao, Xiangyong,Li, Xiaobing,et al. 3D-Printing of inverted pyramid suspending architecture for pyroelectric infrared detectors with inhibited microphonic effect[J]. INFRARED PHYSICS & TECHNOLOGY,2016,76:111-115. |
| APA | Xu, Qing.,Zhao, Xiangyong.,Li, Xiaobing.,Deng, Hao.,Yan, Hong.,...&Neumann, Norbert.(2016).3D-Printing of inverted pyramid suspending architecture for pyroelectric infrared detectors with inhibited microphonic effect.INFRARED PHYSICS & TECHNOLOGY,76,111-115. |
| MLA | Xu, Qing,et al."3D-Printing of inverted pyramid suspending architecture for pyroelectric infrared detectors with inhibited microphonic effect".INFRARED PHYSICS & TECHNOLOGY 76(2016):111-115. |
入库方式： OAI收割
来源：上海硅酸盐研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。