GAS actuated micro-jet pump for micro-fluidic systems
文献类型：会议论文
| 作者 | Li XH ; Yu XM; Cui HH(崔海航); Li ZH(李战华); Zhang DC
|
| 出版日期 | 2005 |
| 会议名称 | 9th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2005 |
| 会议日期 | October 9, 2005 - October 13, 2005 |
| 会议地点 | Boston, MA, United states |
| 关键词 | Air bubbles Etching step Micro-jet Pump chambers Solid wall Vacuum suction |
| 中文摘要 | We present the results on the design, fabrication, and performance of a gas-actuated micro-jet pump for integrated micro-fluidic systems. Vacuum suction mode provided by the pump can effectively decrease the formation of air bubbles and overcome the interface tension between liquid and solid wall in the micro-fluidic systems [1]. Structurally the pump consists of a nozzle, a throat and a pump chamber, which can be fabricated with one etching step. The pump began to work at the threshold gas actuation pressure of 40kPa, and which can be actuated by a medical syringe. Copyright © 2005 by the Transducer Research Foundation, Inc. |
| 收录类别 | EI |
| 会议录 | Micro Total Analysis Systems - Proceedings of MicroTAS 2005 Conference: 9th International Conference on Miniaturized Systems for Chemistry and Life Sciences
 |
| 语种 | 英语 |
| ISBN号 | 0974361119 |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/60281]  |
| 专题 | 力学研究所_力学所知识产出(1956-2008) |
| 推荐引用方式 GB/T 7714 | Li XH,Yu XM,Cui HH,et al. GAS actuated micro-jet pump for micro-fluidic systems[C]. 见:9th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2005. Boston, MA, United states. October 9, 2005 - October 13, 2005. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。