Characterisation of air-in-water upward flows with Electrical Impedance Tomography and Wire Mesh Sensor
文献类型：会议论文
| 作者 | Jia J; Wang M ; Faraj Y; Zhang J; Yu X
|
| 出版日期 | 2014 |
| 会议名称 | 7th World Congress in Industrial Process Tomography, WCIPT7 |
| 会议日期 | September 2, 2013 - September 5, 2013 |
| 会议地点 | Krakow, Poland |
| 关键词 | Conjugate gradients methods Electrical impe dance tomography (EIT) Electrical impedance tomography Iterative algorithm Lamellar microstructure Linear back projection algorithms Volumetric fractions X ray microtomography |
| 通讯作者 | Jia, J. |
| 中文摘要 | Both Electrical Impedance Tomography (EIT) and Wire-Mesh Sensor (WMS) can present the characterisation of air-in-water upward flows, for instance in-situ volumetric fraction and velocity of air phase. The performance of EIT with linear back projection (LBP) algorithm and WMS was compared in the previous research. In this study, the same EIT measurement data were off-line processed with the sensitivity theorem based inverse solution using conjugate gradients method (SCG), which is an iterative algorithm. In two flow regimes, air void fraction and air velocity produced by LBP and SCG method in EIT are investigated against WMS. © 2014 International Society for Industrial Process Tomography. |
| 收录类别 | EI |
| 会议录 | 7th World Congress in Industrial Process Tomography
 |
| 语种 | 英语 |
| ISBN号 | 9780853163237 |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/60230]  |
| 专题 | 力学研究所_流固耦合系统力学重点实验室(2012-) |
| 推荐引用方式 GB/T 7714 | Jia J,Wang M,Faraj Y,et al. Characterisation of air-in-water upward flows with Electrical Impedance Tomography and Wire Mesh Sensor[C]. 见:7th World Congress in Industrial Process Tomography, WCIPT7. Krakow, Poland. September 2, 2013 - September 5, 2013. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。