Gas-water flow interface characterisation using electrical resistance tomography
文献类型:会议论文
作者 | Wang M![]() ![]() ![]() ![]() ![]() |
出版日期 | 2014 |
会议名称 | 2nd World Congress on Industrial Process Tomography |
会议日期 | August 29, 2001 - August 31, 2001 |
会议地点 | Hannover, Germany |
关键词 | Electrical contacts Electrical resistance tomography Electrical tomography Flow regime identification Flow regimes Liquid level detection Measurement strategies Signal saturation |
通讯作者 | Wang, M. |
中文摘要 | The paper presents a preliminary study for characterisation of gas-water flow in a 20 m horizontal flow loop using electrical resistance tomography. Two measurement strategies are proposed and tested for flow regime identification based on using a conductive ring and liquid level detection. The principal challenge in such impedance-based measurements is overcoming the saturation problem caused by electrodes loosing electrical contact with conductive liquid, as often occurs in bubbly or slug flow. Experimental measurements and analysis are presented that shows both methods can be deployed successfully. © 2014 International Society for Industrial Process Tomography. |
收录类别 | EI |
会议录 | 2nd World Congress on Industrial Process Tomography
![]() |
语种 | 英语 |
ISBN号 | 9780853163183 |
源URL | [http://dspace.imech.ac.cn/handle/311007/60231] ![]() |
专题 | 力学研究所_流固耦合系统力学重点实验室(2012-) |
通讯作者 | Wang, M. |
推荐引用方式 GB/T 7714 | Wang M,Zhen Z,Ma Y,et al. Gas-water flow interface characterisation using electrical resistance tomography[C]. 见:2nd World Congress on Industrial Process Tomography. Hannover, Germany. August 29, 2001 - August 31, 2001. |
入库方式: OAI收割
来源:力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。