Flow Structure and Heat Exchange Analysis in Internal Cooling Channel of Gas Turbine Blade
文献类型：期刊论文
| 作者 | Szwaba, R., Kaczynski, P., Doerffer, P. and Telega, J.1 |
| 出版日期 | 2016 |
| 关键词 | cooling internal blade channels heat exchange transient liquid crystal method Thermodynamics Engineering |
| 中文摘要 | Steam pipelines applied in power units operate at high pressures and temperatures. In addition, to stress from the pipeline pressure also arise high thermal stresses in transient states such as start-up, shutdown or a load change of the power unit. Time-varying stresses are often the cause of the occurrence of fatigue cracks since the plastic deformations appear at the stress concentration regions. To determine the transient temperature of the steam along the steam flow path and axisymmetric temperature distribution in the pipeline wall, a numerical model of pipeline heating was proposed. To determine the transient temperature of the steam and pipeline wall the finite volume method (FVM) was used Writing the energy conservation equations for control areas around all the nodes gives a system of ordinary differential equations with respect to time. The system of ordinary differential equations of the first order was solved by the Runge-Kutta method of the fourth order to give the time-temperature changes at the nodes lying in the area of the wall and steam. The steam pressure distribution along pipeline was determined from the solution of the momentum conservation equation. Based on the calculated temperature distribution, thermal stresses were determined. The friction factor was calculated using the correlations of Churchill and Haaland, which were proposed for pipes with a rough inner surface. To assess the accuracy of the proposed model, numerical calculations were also performed for the thin-walled pipe, and the results were compared to the exact analytical solution. Comparison of the results shows that the accuracy of the proposed model of pipeline heating is very satisfactory. The paper presents examples of the determination of the transient temperature of the steam and the wall. |
| 源URL | [http://ir.etp.ac.cn/handle/311046/113066]  |
| 专题 | 工程热物理研究所_Journal of Thermal Science_期刊论文 |
| 作者单位 | 1.[Takano, Hirofumi 2.Kamikihara, Daiyu 3.Ono, Daisuke 4.Nakao, Shinichiro 5.Yamamoto, Hideki 6.Miyazato, Yoshiaki] Univ Kitakyushu, Kitakyushu, Fukuoka 8080135, Japan. |
| 推荐引用方式 GB/T 7714 | Szwaba, R., Kaczynski, P., Doerffer, P. and Telega, J.. Flow Structure and Heat Exchange Analysis in Internal Cooling Channel of Gas Turbine Blade[J],2016. |
| APA | Szwaba, R., Kaczynski, P., Doerffer, P. and Telega, J..(2016).Flow Structure and Heat Exchange Analysis in Internal Cooling Channel of Gas Turbine Blade.. |
| MLA | Szwaba, R., Kaczynski, P., Doerffer, P. and Telega, J.."Flow Structure and Heat Exchange Analysis in Internal Cooling Channel of Gas Turbine Blade".(2016). |
入库方式： OAI收割
来源：工程热物理研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。