Identification of structure errors of 3-PRS-XY mechanism with Regularization method
文献类型：期刊论文
| 作者 | Huang, Peng1; Wang, Jinsong2; Wang, Liping1; Yao, Rui3 |
| 刊名 | MECHANISM AND MACHINE THEORY
 |
| 出版日期 | 2011-07-01 |
| 卷号 | 46期号:7页码:927-944 |
| 关键词 | Parallel mechanism Error identification Kinematical calibration Regularization method |
| 英文摘要 | In a complicated spatial parallel or hybrid machine tool, error identification or kinematical calibration is an important way to improve and guarantee the accuracy of the end-effector. In this study, error model and kinematics with error based on 3-PRS-XY hybrid mechanism are firstly derived to introduce all possible manufacturing and assembling errors into calibration. Then, identification matrix is numerically analyzed to provide theoretical basis for measurement and calibration. Combining the advantages of calibration schemes based on both inverse and forward kinematics model, a new measurement scheme is put forward, in which not all freedoms of motions needs to be measured and error identification could be efficiently accomplished in one time measurement. With this measurement scheme, standard measuring tools are effectively used to reduce the cost of calibration. However, solution of the singular and ill-conditioning identification equations is still difficult. Therefore, for solving the ill-posed problem in error identification, several practical Regularization methods are adopted. The results of simulation and experiment verify feasibility and effectivity of the methods. (C) 2011 Elsevier Ltd. All rights reserved. |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000289717200007 |
| 源URL | [http://ir.bao.ac.cn/handle/114a11/7859]  |
| 专题 | 国家天文台_射电天文研究部 |
| 作者单位 | 1.Tsinghua Univ, Dept Precis Instruments & Mechanol, Beijing 100084, Peoples R China 2.Univ Elect Sci & Technol China, Chengdu 610054, Peoples R China 3.Chinese Acad Sci, Natl Astron Observ, Beijing 100012, Peoples R China |
| 推荐引用方式 GB/T 7714 | Huang, Peng,Wang, Jinsong,Wang, Liping,et al. Identification of structure errors of 3-PRS-XY mechanism with Regularization method[J]. MECHANISM AND MACHINE THEORY,2011,46(7):927-944. |
| APA | Huang, Peng,Wang, Jinsong,Wang, Liping,&Yao, Rui.(2011).Identification of structure errors of 3-PRS-XY mechanism with Regularization method.MECHANISM AND MACHINE THEORY,46(7),927-944. |
| MLA | Huang, Peng,et al."Identification of structure errors of 3-PRS-XY mechanism with Regularization method".MECHANISM AND MACHINE THEORY 46.7(2011):927-944. |
入库方式： OAI收割
来源：国家天文台
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。