线性共蒸法制备非均匀膜的误差特性模拟分析
文献类型：期刊论文
| ; | |
| 作者 | 沈自才 ; 孔伟金 ; 邵建达 ; 范正修 |
| 刊名 | 强激光与粒子束
 |
| 出版日期 | 2005 |
| 卷号 | 17期号:6页码:866 |
| 关键词 | 光学薄膜 Optical film 非均匀 Inhomogeneous 渐变折射率 Graded index 共蒸法 Co-evaporation |
| ISSN号 | 1001-4322 |
| 其他题名 | Simulation analysis of error characteristic of inhomogeneous coatings prepared by linear co-evaporation |
| 中文摘要 | 对双源线性共蒸法制备的非均匀薄膜折射率分布与光学特性的关系作了探讨，并与均匀介质膜的光学特性作了对比；从折射率正变和负变两个方面．讨论了混合介质膜折射率不同变化规律对光学性能带来的影响；讨论了厚度误差和折射率极值误差对非均匀膜光学性能的影响。结果发现：折射率变化规律误差主要对非均匀膜的应用波段范围产生影响，而膜层厚度误差和折射率极值误差超过一定值时，将对薄膜光学特性产生重要影响。; The optical properties of inhomogeneous coatings which were prepared by double-source linear co-evaporation, were discussed and compared with that of homogeneous coatings. The influences of the refractive index distributions, maximum index-departure and coating thickness-deviation on the optical characteristics of coatings were discussed respectively. Analysis results show that the refractive-index distribution regularity error has important influence on the wavelength application range of the coatings, and the thickness error or index-departure has vital influence on the optical properties of inhomogeneous coatings. |
| 学科主题 | 光学薄膜 |
| 分类号 | O484 |
| 收录类别 | ei |
| 语种 | 中文 |
| 公开日期 | 2009-09-22 ; 2010-10-12 |
| 源URL | [http://ir.siom.ac.cn/handle/181231/4482]  |
| 专题 | 上海光学精密机械研究所_光学薄膜技术研究与发展中心 |
| 推荐引用方式 GB/T 7714 | 沈自才,孔伟金,邵建达,等. 线性共蒸法制备非均匀膜的误差特性模拟分析, Simulation analysis of error characteristic of inhomogeneous coatings prepared by linear co-evaporation[J]. 强激光与粒子束,2005,17(6):866, 870. |
| APA | 沈自才,孔伟金,邵建达,&范正修.(2005).线性共蒸法制备非均匀膜的误差特性模拟分析.强激光与粒子束,17(6),866. |
| MLA | 沈自才,et al."线性共蒸法制备非均匀膜的误差特性模拟分析".强激光与粒子束 17.6(2005):866. |
入库方式： OAI收割
来源：上海光学精密机械研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。