The impact of additives on the formation and leaching characteristics of the vitrified slag
文献类型：会议论文
| 作者 | Zhang JL(张金龙) ; Li YJ(李要建); Xu YX(徐永香); Sheng HZ(盛宏至)
|
| 出版日期 | 2009 |
| 会议名称 | Joint Conference: International Thermal Treatment Technologies (IT3) and Hazardous Waste Combustors (HWC) |
| 会议日期 | May 18, 2009 - May 21, 2009 |
| 会议地点 | Cincinnati, OH, United states |
| 关键词 | Analysis results Arc DC plasma Hazardous wastes Inorganic waste Leaching characteristics Leaching rates Microscopic structures Oxygen ions Peak widths Plasma technology Plasma treatment Reactor systems Si ions State-of-the-art technology XRD |
| 通讯作者 | Zhang, J. (zhangjinlong@imech.ac.cn) |
| 中文摘要 | Plasma technology is a state-of-the-art technology to destroy various types of hazardous wastes. The vitrified slag can form in the process of plasma treatment of inorganic wastes and effectively stabilize and immobilize heavy metals, and its leaching rate is very low. In this paper, the impact of additives on the formation and leaching characteristics of the vitrified slag has been studied by a 30 kW DC plasma arc reactor system and rotating agitator, respectively. In the experiment, the mixtures of additives (SiO2, Na2CO3, Na2SiO3 and CaO) and two types of fly ashes have been vitrified, and leaching rates of the vitrifies slag have been tested according to Identification standards for hazardous wastes - Identification for extraction toxicity (GB 5085.3-2007). XRD (X-ray diffraction) analysis results of the microscopic structures of the vitrified slag show they are amorphous. The impact of additives depend on the ration of O/Si (the ratio of the whole oxygen ions to the whole network former Si ions in the vitrified slag, range of 2-3) and the basicity (range of 0.2-0.8), which are the determinative factors in the formation of the vitrified slag. The bigger ratio of O/Si and the narrower peak width of the spectrum lead to the higher leaching characteristics and more unstable vitrified slag. |
| 收录类别 | EI |
| 会议录 | Joint Conference: International Thermal Treatment Technologies (IT3) and Hazardous Waste Combustors (HWC)
 |
| 语种 | 英语 |
| ISBN号 | 9781615671830 |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/60471]  |
| 专题 | 力学研究所_等离子体与燃烧中心(2009-2011) |
| 推荐引用方式 GB/T 7714 | Zhang JL,Li YJ,Xu YX,et al. The impact of additives on the formation and leaching characteristics of the vitrified slag[C]. 见:Joint Conference: International Thermal Treatment Technologies (IT3) and Hazardous Waste Combustors (HWC). Cincinnati, OH, United states. May 18, 2009 - May 21, 2009. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。