Effect of thermophysical property and coating thickness on microstructure and characteristics of a casting
文献类型：期刊论文
| 作者 | Cheng AC; Jia BL; Guo RF; Ren XP(任秀平); Xuan HB; Zhou TT |
| 刊名 | CHINA FOUNDRY
 |
| 出版日期 | 2017 |
| 卷号 | 14期号:1页码:46-54 |
| 关键词 | improved investment casting thermophysical property coating thickness microstructure property |
| ISSN号 | 1672-6421 |
| 中文摘要 | A new improved investment casting technology (IC) has been presented and compared with the existing IC technology such as lost foam casting (LFC). The effect of thermophysical property and coating thickness on casting solidification temperature field microstructure and hardness has been investigated. The results show that the solidification rate decreases inversely with the coating thickness when the coating contains silica sol zircon powder mullite powder and defoaming agent. In contrast the solid cooling rate increases as the coating thickness increases. However the solidification rate and solid cooling rate of the casting produced by the existing IC and the improved IC are very similar when the coating thickness is 5 mm so the microstructure and hardness of a container corner fitting produced by the improved IC and the existing IC are similar. The linear regression equation for the grain size (d) and cooling rate (v) of the castings is d=-0.41v+206.1. The linear regression equation for the content of pearlite (w) and solid cooling rate (t) is w=1.79t+6.71. The new improved IC can greatly simplify the process and decrease the cost of production compared with the existing IC. Contrasting with LFC container corner fittings produced by the new improved IC have fewer defects and better properties. It was also found that the desired microstructure and properties can be obtained by changing the thermophysical property and thickness of the coating. |
| 类目[WOS] | Metallurgy & Metallurgical Engineering |
| 研究领域[WOS] | Metallurgy & Metallurgical Engineering |
| 关键词[WOS] | INTERFACIAL HEAT-TRANSFER ; MECHANICAL-PROPERTIES ; DIMENSIONAL ACCURACY ; OPERATIONS-RESEARCH ; FOAM ; MOLD ; PERMEABILITY ; PATTERNS ; ALUMINUM ; VACUUM |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000397064300008 |
| 源URL | [http://dspace.imech.ac.cn/handle/311007/60594]  |
| 专题 | 力学研究所_非线性力学国家重点实验室 |
| 推荐引用方式 GB/T 7714 | Cheng AC,Jia BL,Guo RF,et al. Effect of thermophysical property and coating thickness on microstructure and characteristics of a casting[J]. CHINA FOUNDRY,2017,14(1):46-54. |
| APA | Cheng AC,Jia BL,Guo RF,任秀平,Xuan HB,&Zhou TT.(2017).Effect of thermophysical property and coating thickness on microstructure and characteristics of a casting.CHINA FOUNDRY,14(1),46-54. |
| MLA | Cheng AC,et al."Effect of thermophysical property and coating thickness on microstructure and characteristics of a casting".CHINA FOUNDRY 14.1(2017):46-54. |
入库方式： OAI收割
来源：力学研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。