Investigation and simulation of the shear lip phenomenon observed in a high-speed abradable seal for use in aero-engines
文献类型：期刊论文
| 作者 | Xue, Weihai ; Gao, Siyang ; Duan, Deli ; Zheng, Hailiang ; Li, Shu |
| 刊名 | WEAR
 |
| 出版日期 | 2017-09-15 |
| 卷号 | 386-387页码:195-203 |
| ISSN号 | 0043-1648 |
| 关键词 | Seal coating High-speed rubbing GH4169 blade Compressor blades Blade shear lip |
| 通讯作者 | Duan, DL (reprint author), Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China. |
| 中文摘要 | Abradable seals are used in the compressor sections of aero-engines, and their performance affects engine efficiency and durability. The sliding-induced surface damage between a type GH4169 turbine blade and a CuAlNiG seal coating was investigated under simulated working conditions using an improved high-speed rubbing test rig. The influence of different linear speeds (150, 300 m/s), incursion rates (5, 50, 500 mu m/s) and environment temperatures (300, 450 degrees C) were researched. According to variations in weight and height measurements of the blade test samples, and based on observations of the blade wear scar macro-morphologies, it was found that blade wear with a prominent shear lip increases with linear speed and temperature but decreases with incursion rate. The surface and cross-section morphologies, phase components of the blade and coating wear scars were analyzed using SEM, EDS and XRD. The formation mechanism of the shear lip was revealed for the first time. It was found that a double-layer shear lip was produced by the combined action of a shear mixed layer and blade matrix softening, both of which resulted from high-intensity frictional heating. (C) 2017 Elsevier B.V. All rights reserved. |
| 学科主题 | Engineering, Mechanical ; Materials Science, Multidisciplinary |
| 资助信息 | National Natural Science Foundation of China [50675215]; Tribology Science Fund of State Key Laboratory of Tribology and Innovation [SKLTKF15B09] |
| 收录类别 | SCI |
| 语种 | 英语 |
| 公开日期 | 2017-08-17 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/78011]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Xue, Weihai,Gao, Siyang,Duan, Deli,et al. Investigation and simulation of the shear lip phenomenon observed in a high-speed abradable seal for use in aero-engines[J]. WEAR,2017,386-387:195-203. |
| APA | Xue, Weihai,Gao, Siyang,Duan, Deli,Zheng, Hailiang,&Li, Shu.(2017).Investigation and simulation of the shear lip phenomenon observed in a high-speed abradable seal for use in aero-engines.WEAR,386-387,195-203. |
| MLA | Xue, Weihai,et al."Investigation and simulation of the shear lip phenomenon observed in a high-speed abradable seal for use in aero-engines".WEAR 386-387(2017):195-203. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。