Microstructure, Texture Evolution and Mechanical Properties of VT3-1 Titanium Alloy Processed by Multi-Pass Drawing and Subsequent Isothermal Annealing
文献类型：期刊论文
| 作者 | Lei, Xiaofei ; Dong, Limin ; Zhang, Zhiqiang ; Liu, Yujing ; Hao, Yulin ; Yang, Rui ; Zhang, Lai-Chang |
| 刊名 | METALS
 |
| 出版日期 | 2017-04-01 |
| 卷号 | 7期号:4页码:- |
| 关键词 | titanium alloy warm drawing isothermal annealing texture evolution mechanical properties |
| ISSN号 | 2075-4701 |
| 通讯作者 | Dong, LM (reprint author), Chinese Acad Sci, Inst Met Res, 72 Wenhua Rd, Shenyang 110016, Peoples R China. ; Zhang, LC (reprint author), Edith Cowan Univ, Sch Engn, 270 Joondalup Dr, Perth, WA 6027, Australia. |
| 中文摘要 | Microstructure, texture evolution, and mechanical properties of Ti-6Al-1.5Cr-2.5Mo-0.5Fe-0.3Si (VT3-1) titanium alloy processed by multi-pass drawing and subsequent isothermal annealing were systematically investigated. A fiber-like microstructure is formed after warm drawing at 760 degrees C with 60% area reduction. After isothermal annealing, the samples deformed to different amounts of area reduction show a similar volume fraction (80%) of alpha phase, while the sample deformed to 60% exhibits a homogeneous microstructure with a larger grain size (5.8 mu m). The major texture component of alpha phase developed during warm drawing is centered at a position of {phi(1) = 10 degrees, phi = 65 degrees, phi 2 = 0 degrees}. The textures for annealed samples are almost along the orientation of original deformation textures and show significant increases in orientation density and volume fraction compared with their deformed states. In addition, for the drawn samples, the ultimate tensile strength increases but the ductility decreases with increasing drawing deformation. A negative slope of yield strength of annealed samples versus grain size (d(-1/2)) is found due to the difference between texture softening for as-rolled + annealed state and texture hardening for drawn + annealed state. The mechanical properties of annealed samples are found to be strongly dependent on grain size and texture, resulting in the balance of the strength and ductility. |
| 学科主题 | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| 收录类别 | SCI |
| 语种 | 英语 |
| 公开日期 | 2017-08-17 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/78194]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Lei, Xiaofei,Dong, Limin,Zhang, Zhiqiang,et al. Microstructure, Texture Evolution and Mechanical Properties of VT3-1 Titanium Alloy Processed by Multi-Pass Drawing and Subsequent Isothermal Annealing[J]. METALS,2017,7(4):-. |
| APA | Lei, Xiaofei.,Dong, Limin.,Zhang, Zhiqiang.,Liu, Yujing.,Hao, Yulin.,...&Zhang, Lai-Chang.(2017).Microstructure, Texture Evolution and Mechanical Properties of VT3-1 Titanium Alloy Processed by Multi-Pass Drawing and Subsequent Isothermal Annealing.METALS,7(4),-. |
| MLA | Lei, Xiaofei,et al."Microstructure, Texture Evolution and Mechanical Properties of VT3-1 Titanium Alloy Processed by Multi-Pass Drawing and Subsequent Isothermal Annealing".METALS 7.4(2017):-. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。