Effect of initial temper on the creep behavior of precipitation hardened WE43 alloy
文献类型：期刊论文
| 作者 | Kang, Y. H. ; Wang, X. X. ; Zhang, N. ; Yan, H. ; Chen, R. S. |
| 刊名 | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 |
| 出版日期 | 2017-03-24 |
| 卷号 | 689页码:419-426 |
| 关键词 | WE43 alloy Precipitate Creep mechanism Creep resistance |
| ISSN号 | 0921-5093 |
| 通讯作者 | Yan, H ; Chen, RS (reprint author), Chinese Acad Sci, Inst Met Res, Grp Magnesium Alloys & Their Applicat, 62 Wencui Rd, Shenyang 110016, Peoples R China. |
| 中文摘要 | The effect of initial tempers with different characteristics of precipitates and contents of supersaturated solute atoms, including the homogenized, peak aged and over aged conditions, on the tensile creep behavior of WE43 alloy has been investigated at 523 K. Results show that the peak aged alloy at 523 K obtained superior creep resistance than the homogenized, peak aged at 498 K and over aged at 523 K alloy. A uniform dispersion of (3 precipitates was dynamically formed within steady stage creep microstructure of the homogenized WE43 alloy after creep deformation of 200 h. It is found that the precipitate size and distribution is similar with the alloy aged equal time without the applied stress. In addition, the WE43 alloy in all tempers obtains similar precipitate size and distribution in their steady stage creep microstructures. Therefore, it is inferred that the various initial tempers mainly affect the primary creep stage. Furthermore, numerous dislocations were detected between precipitates and the stress exponent n is 4.5, which is close to 5. Thereby, dislocation climb is suggested to be the creep mechanism. The reason for the peak aged alloy at 523 K obtained superior creep resistance is that the initial uniform dispersion of beta '' and (beta ' precipitates have smaller precipitate size and higher precipitate density than that of the homogenized and over aged alloy, which are more effectively to hider dislocation climb. However, a deterioration of creep resistance was occurred in the peak aged alloy at 498 K due to precipitate recovery when crept at 523 K. As a consequence, WE43 alloy in peak aged temper at 523 K achieves the highest creep resistance. |
| 学科主题 | Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| 收录类别 | SCI |
| 资助信息 | National Natural Science Foundation of China [51601193, 51531002, 51301173]; National Key Research and Development Program of China [2016YFB0301104]; National Basic Research Program of China (973 Program) [2013CB632202] |
| 语种 | 英语 |
| 公开日期 | 2017-08-17 |
| 源URL | [http://ir.imr.ac.cn/handle/321006/78222]  |
| 专题 | 金属研究所_中国科学院金属研究所 |
| 推荐引用方式 GB/T 7714 | Kang, Y. H.,Wang, X. X.,Zhang, N.,et al. Effect of initial temper on the creep behavior of precipitation hardened WE43 alloy[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2017,689:419-426. |
| APA | Kang, Y. H.,Wang, X. X.,Zhang, N.,Yan, H.,&Chen, R. S..(2017).Effect of initial temper on the creep behavior of precipitation hardened WE43 alloy.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,689,419-426. |
| MLA | Kang, Y. H.,et al."Effect of initial temper on the creep behavior of precipitation hardened WE43 alloy".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 689(2017):419-426. |
入库方式： OAI收割
来源：金属研究所
浏览0
下载0
收藏0
其他版本
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。